These forms will take you through the process of conducting a self-evaluation and developing a transition plan and an action plan....
Search Results "Self-Closing Door"
Commonly Searched Documents
-
Self-Evaluation Forms
-
904.5.1 Self-Service Shelves and Dispensing Devices
Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with 308....
-
904.5.1 Self-Service Shelves and Dispensing Devices
Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with 308....
-
4.13.7 Two Doors in Series
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
4.13.7 TWO DOORS IN SERIES
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
2.2.6 Door Use
Door type Door 1 Door 2 Door 3 Clear opening 825 mm 1040 mm 755 mm Closer No No Yes Resistance...
-
R218 Doors, Doorways, and Gates
R218 Doors, Doorways, and Gates. Where provided at pedestrian facilities, doors, doorways, and gates shall comply with section 404 of Appendix D to 36 CFR part 1191....
-
§35.105 Self-evaluation
§35.105 Self-evaluation....
- Access Board: Multi User Toilet Room Layout
-
408.3.2 Swinging Doors
408.3.2 Swinging Doors. Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
11B-407.3.4 Door and signal timing
The minimum acceptable time from notification that a car is answering a call until the doors of that car start to close shall be calculated from the following equation: T = D/(1.5 ft/...
-
SECTION 1010 DOORS, GATES AND TURNSTILES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
Door and Gate Surfaces [§404.2.10]
Door and Gate Surfaces [§404.2.10] The bottom surface of doors and gates on the push side must be smooth to a height of at least 10”....
-
Common Problems with Entrances and Doors
Common Problems with Entrances and Doors Ø Each leaf of a set of double doors is often too narrow to be used independently by someone who uses a wheelchair....
-
Doors and Gates Operated Only By Security Personnel [§404.1, Ex]
Doors and Gates Operated Only By Security Personnel [§404.1, Ex] Manual doors, doorways, and gates that are designed to be operated only by security personnel, such as guards in...
- DORMA ED700 Low-Energy Swing Door Operator
-
Doors [4.13]
[See subsections ...]
-
413.1.1 Caption Controls (Section-by-Section Analysis)
Section-by-Section Analysis) This proposed section would require that, where video-capable hardware provides physical volume adjustment controls, such ICT must also have a control for closed...
-
5. BENEFITS DISCUSSION
For example, some people’s hearing or vision disability may not be such that they would need closed movie captioning or audio description. ...
-
1132A.2 Interior doors and secondary exterior doors
1132A.2 Interior doors and secondary exterior doors....
-
H. Stall Door
If the accessible toilet is in a stall, is the stall door positioned diagonally opposite, not directly in front of, the toilet so persons who use wheelchairs may pull fully into the stall...
-
C. Door Hardware
Is the door hardware (lever, pull, panic bar, etc.) usable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...