(a) At each accessible entrance to a building or facility, at least one door shall comply with 4.13....
Search Results "Fire-Building Surface"
-
4.1.3(7)(a)
-
§40.3(b)(3)
(3) The alteration of an existing building, or of such portions thereof, to which application of the standards is not structurally feasible....
-
ADMINISTRATIVE AUTHORITY
A governmental agency that adopts or enforces regulations and standards for the design, construction, or alteration of buildings and facilities....
-
6.1 GENERAL
In addition to the requirements of 4.1 to 4.33, Health Care buildings and facilities shall comply with 6....
-
[A] ADDITION
[DSA-AC] An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
[A] REPAIR
The reconstruction or renewal of any part of an existing building for the purpose of its maintenance or to correct damage....
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
REPAIR
The reconstruction or renewal of any part of an existing building for the purpose of its maintenance or to correct damage....
-
TTY Scoping [4.1.3(17)(c)]
TTY Scoping [4.1.3(17)(c)] ADAAG requires at least one TTY on site when there are four or more pay phones (and at least one is interior) and in specific buildings or locations when a...
-
3.5.1 General
If the main entrance to a building is not accessible, in the vicinity of the closest accessible entrance. Accessible means of egress out of a building....
-
1017.5 Tread Obstacles
EXCEPTION: Where the surface is other than asphalt, concrete, or boards, tread obstacles shall be permitted to not exceed 2 inches (50 mm) in height measured vertically to the highest point...
-
Detectable Warnings [4.7.7]
Since curb ramps remove this detectable drop-off, ADAAG originally required a distinctive dome patterning for the surface of curb ramps detectable by canes or by foot so that people with...
-
8. Report
Measurements—Data from the profile measuring process shall include the date and time of day of the measurement, the location of the measurement, length of measurement, and the descriptions of the surface...
-
1017.5 Tread Obstacles
EXCEPTION: Where the surface is other than asphalt, concrete, or boards, tread obstacles shall be permitted to not exceed 2 inches (50 mm) in height measured vertically to the highest point...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Existing elevator cab size
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
- Bobrick Folding Shower Seat B-5191
- Schindler's Elevator PORT (Personal Occupant Requirement Terminal)
- Schindler 330A Low Rise Holeless Hydraulic Elevator
-
Architectural Barriers Act (ABA) and the Americans with Disabilities Act (ADA)
The Architectural Barriers Act requires federal buildings to comply with accessibility standards. The U.S. Access Board, my agency and their Office of Gen....
-
Scoping [4.1.3(5)]
There may be more than one floor level, such as a mezzanine, within a "story" but the requirement for an elevator applies to buildings with more than one story....
-
1003.1 Applicability
(DSA-AC & HCD 1-AC) In addition to the requirement of this chapter, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required...