Hello. Please sign in!

Soiltac Liquid Mix-In

The trail segment is composed of the stabilizer, Soiltac Liquid Mix-in and is 5 feet wide by 30 feet long. The segment contains timber edging. The Soiltac Liquid Mix-in is applied to a base of 2 inches of native soil. Soiltac Liquid Mix-in is then tilled into 4 inches of ¼ inch minus loose limestone aggregate. The surface is compacted and then sprayed to seal. The stabilizer has a penetration depth of 4 inches. After the first heavy rainfall, the surface seemed to maintain itself well. It was only slightly soft under foot, showing footprint indentations, but seemed to firm back up. There were no noticeable drainage issues for this surface. This segment performed better than its topical application counterpart (see the note in the liquid topical application).

Soiltac Liquid Mix-In applied by trail crew.

Soiltac Liquid Mix-In is applied to a base of 2 inches of native soil.  June 27, 2007.

Soiltac Liquid Mix-In tilled into surface.

Soiltac Liquid Mix-In is then tilled into 4 inches of ¼ inch minus loose limestone aggregate. June 27, 2007.

Soiltac Liquid Mix-In tilled into surface.

Soiltac Liquid Mix-In is then tilled into 4 inches of ¼ inch minus loose limestone aggregate.  June 27, 2007.

Soiltac Liquid Mix-In tilled into surface.

Photo 58 Soiltac Liquid Mix-In surface is tilled. June 27, 2007.

Soiltac Liquid Mix-In leveled with board by trail crew.

Soiltac Liquid Mix-In trail segment is leveled.  June 27, 2007.

Soiltac Liquid Mix-In completed trail segment.

Soiltac Liquid Mix-In trail segment is prepared.  June 27, 2007.

Soiltac Liquid Mix-In rolled and compacted.

Soiltac Liquid Mix-In trail segment is compacted.  June 27, 2007.

Soiltac Liquid Mix-In sprayed by trail crew.

Soiltac Liquid Mix-In trail segment is sprayed to seal with a penetration of 4 inches.  June 27, 2007.

Soiltac Liquid Mix-In holds firm.

Soiltac Liquid Mix-In trail segment seemed to maintain itself well.  March 13, 2008.

Soiltac Liquid Mix-In appears like natural surface.

Soiltac Liquid Mix-In trail segment was only slightly soft under foot, showing footprint indentations.  March 13, 2008.

Soiltac Liquid Mix-In wear along edging.

Soiltac Liquid Mix-In more than one year after installation seemed to maintain itself.  June 12, 2008.

Soiltac Liquid Mix-In some rutting.

Soiltac Liquid Mix-In almost two years after installation.  March 17, 2009.

Soiltac Liquid Mix-In indentation.

Soiltac Liquid Mix-In segment performed better than its topical application counterpart. March 17, 2009

Soiltac Liquid Mix-In some ruts and heaving.

Soiltac Liquid Mix-In performed better than its topical application counterpart. November 2, 2011.

[MORE INFO...]

*You must sign in to view [MORE INFO...]