The finish floor beneath kitchen sinks and work surfaces shall be extended to the wall....
Search Results "Ground Floor Exit"
-
1133A.3 Removable base cabinets
-
11B-604.7.1 Dispensers
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
11B-809.9.3 Removable base cabinets
sinks and work surfaces provided that all of the following conditions are met: a) base cabinets can be removed without the use of specialized tools or knowledge; b) the finish floor...
-
1130A.1 General
The accessible route shall pass through the primary entry door, and shall connect with all additional exterior doors, required clear floor spaces at kitchen appliances and bathroom fixtures...
-
Jim Safranek
Safranek Group collaborates with clients to offer pragmatic, strategic advice and effective problem solving, based on a thorough understanding of the technical requirements, yet grounded...
-
Lehigh Valley Center for Independent Living (LVCIL) - Allentown, PA
The group is credited with ground-breaking action to increase the accessibility of locations throughout the region before it was mandated by law....
-
§ 382.39 Provision of services and equipment
(1) This assistance shall include, as needed, the services personnel and the use of ground wheelchairs, boarding wheelchairs, on-board wheelchairs where provided in accordance with this...
-
American Dryer, Inc Wall Guard Accessory
Dramatically reducing moisture on walls and floors, new patent-pending Wall Guard is ADA compliant, achieving the four-inch-or-less unit protrusion guidelines without the need to recess...
-
Cybex Total Access Recumbent Bike
This allows fitness enthusiasts who have physical or sensory limitations to take advantage of fitness training on the same gym floor and using the same equipment as those who do not....
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
Access-Able Designs Adult Dressing Bench D-101-42
Stainless steel frame holds up to 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
5. Edge Protection
raised more than 1½ inches in height to provide a minimum 2-inch-high edge protection, measured from the surface of the platform, on each side of the platform not providing entry to or exit...
-
F242.2 Swimming Pools
Different locations will provide increased options for entry and exit, especially in larger pools. Advisory F242.2 Swimming Pools Exception 1....
-
SUMMARY OF THE 19-INCH RECOMMENDATION
selection of the 19 inch height recommendation: Equipment must be accessible to, and usable by, individuals with accessibility needs and will allow independent entry to, use of, and exit...
-
4.3.5.2 180-degree turn
The hallway width was incrementally increased until a user could enter the space, turn around, and exit the space successfully....
-
242.2 Swimming Pools
Different locations will provide increased options for entry and exit, especially in larger pools. Advisory 242.2 Swimming Pools Exception 1....
-
242.2 Swimming Pools
Different locations will provide increased options for entry and exit, especially in larger pools. Advisory 242.2 Swimming Pools Exception 1....
-
1130A.1 General
The accessible route shall pass through the primary entry door, and shall connect with all additional exterior doors, required clear floor spaces at kitchen appliances and bathroom fixtures...
-
ACCESSIBLE ROUTE
Interior accessible routes may include corridors, hallways, floors, ramps, elevators and lifts....
-
608.7 Thresholds
maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a ½ inch (13 mm) high threshold would disturb the structural reinforcement of the floor...
-
604.9.6 Dispensers
The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor....
-
M302.4.2 Clearance Around Base
The base of the diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination...
-
608.5.1 Transfer Type Shower Compartments
compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum above the shower floor...
