Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor....
Search Results "Ground Floor Exit"
Commonly Searched Documents
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
-
1009.6.3 Size
Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
- Open Sesame Remote Controlled Low-Voltage Door System
- Cal-Royal HIL Series Interconnected Lockset
- Excel Dryer, Inc. ThinAir®Hand ADA Surface Mounted Hand Dryer TA-ABS
- Access-Able Designs Child Dressing Bench CH-101
- Hoyer Presence Heavy-Duty Lift
- ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
- Cybex Total Access Leg Extension Exercise Machine
- Pilot Rock LDW-36/18 Campfire Ring
- STI Stopper® Emergency Station, Push, Turn-to-Reset SS-2001E Fire Alarm
- citEcar Wheelchair 6PR SL Street Legal Golf Cart
-
Base Support [No specific provision—affects M303.2.4]
It does obstruct the floor space in front of the gantry and, thus, may limit how close a wheelchair can get to the equipment....
-
2. Analysis of footrest clearance height and depth
Analysis of footrest clearance height and depth Any base support or flange for the mammography machine at floor level (inside the clear floor space width) would obstruct some wheelchair...
-
C. Toilet Rooms:
PSE shall provide and maintain directional signage at inaccessible toilet rooms indicating the location of the nearest accessible toilet room on the Floor Level. ...
-
Engineered Wood Fiber
The accessibility standards require the minimum 30 x 48 inch clear floor space for transfer to/from the accessible play components have a level surface with less than a 2.08 percent cross...
-
Elevator Exemption
The 500 square foot maximum was based on a floor area allowance of 100 square feet per occupant, which is consistent with model building code requirements for business and industrial occupancies...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
809.2 Residential Dwelling Units with Mobility Features
809.2 Residential Dwelling Units with Mobility Features As discussed below, the final rule adds technical requirements to this section for floor surfaces, bedrooms, and weather alert...
-
Why are surface characteristics specified?
Findings from this limited human-subject testing confirmed that individuals who have gait and mobility disabilities make greater demands on the walking surfaces of floors, ramps, and walkways...
-
703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided...
-
Addendum G: Comparison of Transfer Abilities between Men and Women
The average wheelchair seat to floor height for men was 22.2 (±1.44) inches and the average height for women was 21.65 (±1.31) inches....
-
C. Accessibility Within Toilet Rooms
Is at least one stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...