Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
Search Results "Vertical Clearance"
Filters
Commonly Searched Documents
-
404.2.4.1 Swinging Doors and Gates
-
404.2.4.1 Swinging Doors and Gates
Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
-
11B-604.8.1.4 Toe clearance
11B-604.8.1.4 Toe clearance....
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
M9
Does the lavatory have at least a 29-inch-high clearance under the front edge and the top of the rim no more than 34 inches above the floor?...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
11B-607.2 Clearance
[2010 ADAS] 607.2 Clearance. Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
TownSteel ED1300 Grade 1 Concealed Vertical Rod Panic Device
The ED1000 Series Exit Devices and Trims are designed for new or retrofit installation of Von Duprin 98/99 Series. ED1300 is ANSI Certified Grade 1 and UL listed for Panic Hardware....
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
11B-604.8.1.4 Toe clearance
Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces....
-
1017.4.1 Size
Vertical alignment at the intersection of the trails that form the T-shaped space shall be nominally planar. Advisory 1017.4.1 Size. ...
-
1017.4.1 Size
Vertical alignment at the intersection of the trails that form the T-shaped space shall be nominally planar. Advisory 1017.4.1 Size....
-
11B-607.2 Clearance
11B-607.2 Clearance....
-
11B-604.8.1.4 Toe clearance
Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces....
-
Location and Dispersion
[See subsections ...]
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ...
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....
-
Seating [4.32.2] and Knee Clearance [4.32.3]
Seating [4.32.2] and Knee Clearance [4.32.3] Knee space at least 27 inches high is required for a depth of 19 inches....
-
11B-304.3.2 T-Shaped space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm. ...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space...
-
11B-607.2 Clearance
A lavatory complying with Section 11B-606 shall be permitted at the control end of the clearance....
