The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
Search Results "Vertical Clearance"
Filters
Commonly Searched Documents
-
11B-409.4.3 Platform to hoistway clearance
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-304.3.1 Circular space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
11B-304.3.1 Circular space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
11B-304.3.1 Circular space
The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
304.3.1 Circular Space
The space shall be permitted to include knee and toe clearance complying with 306....
-
11B-804.3.1 Clear floor or ground space
The clear floor or ground space shall be centered on the kitchen work surface and shall provide knee and toe clearance complying with Section 11B-306....
-
§ 38.113(d)(3) Exception
Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d) (1) or (2), platform or portable lifts complying with §38.125(b) of this part, or...
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-306.2.2 Maximum depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-404.2.9 Door and gate opening force
Powered doors shall be controlled on both the interior and exterior sides of the doors by sensing devices, push plates, vertical actuation bars or other similar operating devices complying...
-
Architectural Builders Hardware 1811 Vertical Rod Protectors
Fire rated Vertical rod cover 3 1/8" x 24" - 1 1/16" projection from door....
-
Toilet Paper Dispensers
In the final rule, the specified clearance between grab bars and dispensers mounted above them has been revised for consistency with the grab bar specifications in section 609....
-
Don-Jo Mfg., Inc. Vertical Rod Protector 83
., Installs on any type of wood-metal or plastic door, Covers the latching bolt and lower portion of the vertical rod assembly Finishes 630 Fasteners #6 x...
-
Don-Jo Mfg., Inc. Vertical Rod Protector 85
., Installs on any type of wood-metal or plastic door, Covers the latching bolt and lower portion of the vertical rod assembly Finishes 630 Fasteners #6 x...
-
Don-Jo Mfg., Inc. Vertical Rod Protector 81
., Installs on any type of wood-metal or plastic door, Covers the latching bolt and lower portion of the vertical rod assembly Finishes 630 Fasteners #6 x...
-
1003.3 Clearances
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with 1003.3. Advisory 1003.3 Clearances....
-
1003.3 Clearances
Clearances at boat slips and on boarding piers at boat launch ramps shall comply with 1003.3. Advisory 1003.3 Clearances....
-
Play Tables
Where play tables are located on an accessible route, the wheelchair knee clearance minimums are: 24 inches (610 mm) high minimum 30 inches (760 mm) wide minimum...
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3. ...
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
404.2.4.1 Swinging Doors and Gates
Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
