The surface of the turning space and clear floor or ground space shall be firm and stable. ...
Search Results "Ramp Surface"
Filters
Commonly Searched Documents
-
5.3.2.2 Surface
-
4. Curb Ramp Width
4. ...are the curb ramps at least 36" wide, excluding the flared sides, to allow for convenient wheelchair travel?...
-
4.7.4 Surface
The surface of the clear floor or ground spaces required by section 4.0 shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
4.5.4 Surface
The surface of the clear floor or ground space for trash, recycling, and other essential containers shall be firm and stable....
-
15) Curb ramps
15) Curb ramps ADAAG: Curb ramps must have detectable warnings (which must be raised truncated domes) (§4.7.7). UFAS: No requirement for detectable warnings on curb ramps....
-
405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with 405.7. Advisory 405.7 Landings....
-
304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. [2010 ADAS] Advisory 405.7 Landings. ...
-
405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with 405.7. Advisory 405.7 Landings....
-
Landings
Landings Landings are the level surfaces at the top and bottom of each ramp run....
-
304.2 Floor or Ground Surfaces
Floor or ground surfaces of a turning space shall comply with 302. Changes in level are not permitted....
-
11B-406.3 Parallel curb ramps
Parallel curb ramps shall comply with Sections 11B-406.3 and 11B-406.5. A parallel curb ramp may be provided with one sloping segment or two opposing sloping segments....
-
Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis)
Detectable Warning Surfaces on Curb Ramps (Section-by-Section Analysis) When the Access Board issued the 1991 ADAAG, the guidelines contained a requirement for detectable warning surfaces...
-
7.4.1 Surface
The trail tread surface, including resting intervals and passing spaces, shall be both firm and stable....
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. ...
-
Selection of Trail Surface Materials
Selection of Trail Surface Materials A review of trail surfacing products conducted for this project identified approximately 80 different trail surface materials that promoted providing...
-
405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with 405.7. Advisory 405.7 Landings....
-
B7. Curb Ramp Width
Is the width of the curb ramp surface at least 36 inches? [ADA Stds 4.7.3] Yes _____ No _____...
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. [2010 ADAS] Advisory 405.7 Landings....
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. Advisory 11B-405.7 Landings....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Rockwood Manufacturing Company 700 Handrail Bracket
Material: Cast Brass FASTENER: Wood Rail: 5/16-18 x 1-1/2 FH MS, Lead Anchor; 3 ea. 12-24 x 1 FH MS; 2 ea. #8 x 3/4 OH SMS; 1 ea. Back Plate Metal Rail: 5/16-18 x 1-1/2 FH...
-
Rockwood Manufacturing Company 702 Handrail Bracket
Specifications: Material: Cast Brass FASTENER: Wood Rail: 3 ea. #12 x 2 FH WS; 2 ea. #8 x 3/4 OH SMS Metal Rail: 3 ea. #12 x 2 FH WS; 2 ea. 8-32 x 3/4 OH SMS Ordering: ...
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
