303.4 Ramps. Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
Search Results "Ramp Surface"
-
303.4 Ramps
-
11B-902.2.1 Overlap
The clear floor space at dining surfaces shall not overlap the accessible route....
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with 1008.2.5....
-
1008.2.5 Ramps
Within play areas, ramps connecting ground level play components and ramps connecting elevated play components shall comply with 1008.2.5....
-
804.3.3 Exposed Surfaces
804.3.3 Exposed Surfaces. There shall be no sharp or abrasive surfaces under the work surface counters....
-
Ground Level: ADA Standard Section 1008.2.5.1
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
11B-1008.2.5.1 Ground level
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
11B-1008.2.5.1 Ground level
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
Where Ramps and Curb Ramps are Required [§303.4]
Where Ramps and Curb Ramps are Required [§303.4] Ramps and curb ramps are required along accessible routes to span changes in level greater than ½”....
- Envirobond Helps Avoid Surface Staining
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
302 Floor or Ground Surfaces
302 Floor or Ground Surfaces...
-
Accessible Work Surfaces
Concern was expressed that the reference to "work surfaces" may be confused as covering surfaces that are part of a work area or station. Response....
-
6c. Ramp Landing
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
Diagonal Curb Ramps [4.7.10]
A landing at least 48 inches long must be provided outside the through-travel lanes if a diagonal ramp is used. Otherwise, perpendicular curb ramps should be used....
-
6. Exterior Ramp Clear Width between Handrails
6. ...are the other exterior ramps at least 36" wide (between handrails)? [ADA Stds. 4.8.3] Yes __ No __ N/A __ Comments: _________________________________________...
-
EZ-ACCESS The Gateway™ Solid Surface Portable Ramp Video
Requires the Registered User plan or above. Login!
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....