Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
Search Results "Positioning Aids"
Filters
Commonly Searched Documents
-
M305.2.4.1 Circular Cross Section
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
Case Study #1: Auxiliary aids and services under Title II are different from special education and related services under the IDEA.
The school district also must provide appropriate auxiliary aids and services, where necessary, to afford Tommy an equal opportunity to participate in, and enjoy the benefits of, the school...
-
219.3 Receivers
Twenty-five percent minimum of receivers provided, but no fewer than two, shall be hearing-aid compatible in accordance with 706.3. EXCEPTIONS: 1....
-
EFFECTIVE COMMUNICATION DURING FACE-TO-FACE SERVICES
and pursuant to the Effective Communication Policy, THE CREDIT UNION shall provide individuals who are deaf, are hard of hearing, or have speech disabilities with appropriate auxiliary aids...
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated positions....
-
5.2.2.1 Transfer Surface Width Recommendations for M302
Recommendations for M302 The Committee recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily used by patients in a seated position...
-
1. Under Title II, what must public school districts do to provide effective communication to students with hearing, vision, or speech disabilities?
To do this, public schools must provide appropriate “auxiliary aids and services” where necessary to provide effective communication;20 that is, schools must provide appropriate auxiliary...
-
1. Face-to-Face Communications
For brief or simple face-to-face exchanges, very basic aids are usually appropriate....
-
5.2.2 Transfer Surface Size Recommendations for M302
5.2.2 Transfer Surface Size Recommendations for M302 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer...
-
§ 38.125(d)(1) Requirements
All intercity rail cars required to be accessible by §§38.111 (a) and (e) of this subpart shall provide at least one, but not more than two, mobility aid seating location(s) complying with...
-
M301.3.2 Leg Supports
Where stirrups are provided, leg supports shall also be provided and shall comply with M305.4.
-
STATE AND LOCAL GOVERNMENTS
State and local governments must reasonably modify their policies, practices, and procedures; must provide auxiliary aids and services necessary for effective communication; and must make...
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8...
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302 Description: Transfer side provisions are the same for M301 and M302 and require the transfer surface to be...
-
1. Standing Supports
provider should position her in a seated position for safe imaging.”...
-
A. Non-Discrimination
. § 36.302; Atlantis will furnish appropriate auxiliary aids and services, free of charge, when necessary to ensure effective communication with individuals with disabilities...
-
§ 36.311 Mobility devices.
[See subsections ...]
-
407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum.
-
407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door.
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door.
-
11B-407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum.
-
407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum.