These values apply to the vertical component of the field strength inside the area enclosed by the loop, measured 1.2 meters above the floor....
Search Results "Floor Slope"
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-1008.2.3 Water play components
Exceptions: Where the surface of the accessible route, clear floor or ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302,...
-
1009.7.2 Separation
The fire-resistance-rated construction shall extend vertically from the ground to a point 10 feet (3048 mm) above the floor level of the area for assisted rescue or to the roof line, whichever...
-
1133A.4.1 Repositionable countertops
Finished flooring shall be extended to the wall beneath the sink and work surface....
-
Test Procedures
The procedures are based on the draft national standard test method for the firmness and stability of ground and floor surfaces (RESNA 2000), which uses an average of five readings....
-
4. Getting What You Need During Your Visit
Do you have an exam table that lowers to 18 inches from the floor or lower so that I can get on it independently?...
-
Boddingtons GrassCarpet™ Grass Protection Matting
Ideal for outdoor events, weddings, exhibitions, concerts and marquee paths and flooring Ideal for temporary wheelchair access routes Allows a professional clean 'carpet' path for the...
-
Elvoron LU/LA - Limited Use / Limited Application Hydraulic Elevator
Make up to 6 stops or have a total of 6 landing doors Fully automatic push button operation Illuminated buttons and digital floor display Automatic car lighting upon passenger...
-
Guest Rooms
At least on sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
Acceptable Trail Surfacing Requirements
surfaces are currently considered accessible only if the surfacing material is firm, stable, and slip-resistant and the trail has the engineered attributes of adequate width, moderately short slopes...
-
Introduction
When the slope of a sidewalk that is an accessible route becomes steeper than 1 to 20, railings and edge protection are required for safe use....
-
Panda TS.13 Aluminum/Wood Clad Thermally Broken Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
Panda S.11 Aluminum/Wood Clad Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
Smith System Trespa Planner Science Table 30″ Deep 11288
The 1″ adjustable leveling glides provide stability on uneven floors. A science classroom demands compliance with strict codes and standards....
-
Cavity Sliders CL100 ADA LaviLock Hardware Set with 'Vacant / In Use' Indicator
including Emergency Release CL100 Mortise Lock Case IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum and 48 inches (1220 mm) maximum above the finished floor...
-
Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
Standard system features include: Trackless floor design for unobstructed flow and expedient traffic management Low profile 2-3/4" header for aesthetic appeal Choice...
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Shelves, Sales and Service Counters, and Check-Out Aisles
A lowered counter and clear floor space are critical components of an accessible service counter....
