is also available from the CABO/ANSI A117.1‒1992 standard which recommends heights based on the mounting height (1 inch minimum height for signs mounted from 48 to 60 inches above the floor...
Search Results "Ground Floor"
-
Character Height [4.30.3]
-
III-7.7000 Alterations
Entities are permitted to -- (a) Install only one accessible unisex bathroom per floor; (b) Cluster wheelchair seating in altered assembly areas; (c) Use platform lifts as part...
-
Creating a Workable ADA: The Senate and the White House
On August 2, the Senate Committee on Labor and Human Resources voted unanimously to report the ADA, as amended, to the Senate floor....
-
Technical Infeasibility
design solutions are not feasible; or work that would impact load-bearing walls and other essential components of the structural frame, including structural reinforcement of the floor...
-
Signage
are provided for all permanent rooms and spaces in the lodging facility must be mounted on the wall (not the door) adjacent to the latch side of the door and centered 60 inches above the floor...
-
E. Restaurants and Concessions:
PSE shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned...
-
§ 38.77(c)
Vertical stanchions from ceiling to floor shall not interfere with wheelchair or mobility aid circulation and shall be kept to a minimum in the vicinity of accessible doors....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
106.5.45 Primary Function
containing a primary function include, but are not limited to: (i) Remodeling merchandise display areas or employee work areas in a department store; (ii) Replacing an inaccessible floor...
-
608.6 Shower Spray Unit and Water
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical...
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
Panda TS.19 Thermally Broken Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
Summary of Major Provisions
The final rule adds new technical requirements for floor surfaces, bedrooms, and weather alert systems in emergency transportable housing units with mobility features....
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
M301.3.1 Transfer Supports
Figure 5.3-10: Illustration of a concept (not to scale) for a detachable floor mounted support....
-
Willoughby Industries WBL-2320 Ligature-resistant Behavioral Healthcare Lavatory System
Optional Features: * Note: Plug-in transformer must be used with a ground fault interrupter (GFCI) receptacle to prevent possible electrical shock. (Not required on PML valves)...
-
Door King Inc. 9000 Commercial and Industrial Slide Gate Operator
(*Assumes gate is on level ground, in good condition with properly adjusted hardware....
