Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
Search Results "Hybrid Surface System"
-
11B-903.4 Back support
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
11B-403.5.1 Clear width
Except as provided in Sections 11B-403.5.2 and 11B-403.5.3, the clear width of walking surfaces shall be 36 inches (914 mm) minimum....
-
810 Transportation Facilities
The Board has explicitly specified that rail platforms shall slope no more than 1:48 in any direction, consistent with cross slope provisions for walking surfaces in section 403....
-
Telecommunications. (Section-by-Section Analysis)
address situations in which a public accommodation must provide an effective means to communicate by telephone for individuals with disabilities, including the use of automated attendant systems...
-
Guldmann Basic High Sling
The sling is designed for use with both mobile lifters and ceiling hoist systems....
-
11B-217.4 TTYs
Consideration should be given to phone systems that can accommodate both digital and analog transmissions for compatibility with digital and analog TTYs. ◼...
-
Amusement Rides: ADA Standard Section 216.12
Section 216.12 covers scoping requirements in the current ADA Standards for signs at amusement rides.
-
11B-217.4 TTYs
Consideration should be given to phone systems that can accommodate both digital and analog transmissions for compatibility with digital and analog TTYs. ◼...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
801.1 Scope
For example, 806 addresses guest rooms in transient lodging facilities while 902 contains the technical specifications for dining surfaces....
-
12143(c)(7) Plans
(7) Plans The regulations issued under this section shall require that each public entity which operates a fixed route system...
-
§ 37.59(c)
(c) An accessible path from common elements of the station to portions of the facility directly serving the rail system with the earlier completion date....
-
§ 37.3 Paratransit
Paratransit means comparable transportation service required by the ADA for individuals with disabilities who are unable to use fixed route transportation systems....
-
11B-707.9.1 General
Point-of-sale systems that include a video touch screen or any other non-tactile keypad shall be equipped with either of the following:...
-
Proline Drain: Quick Drain USA - Side Waste Outlet Tub to Shower Conversion
Quick Drain's side waste outlet tub to shower conversion system is the only system that allows you to do this without x-raying, core-drilling, and moving the plumbing....
-
Transition Plate
A sloping pedestrian walking surface located at the end(s) of a gangway....
-
T303.3 Cross Section
Gripping surfaces shall have a cross section complying with T303.3....
-
M302.3 Supports
Transfer supports, armrests, and reclining surfaces shall comply with M302.3....
-
M301.3 Supports
Transfer supports, stirrups, and reclining surfaces shall comply with M301.3....
-
106.5.72 Transition Plate
A sloping pedestrian walking surface located at the end(s) of a gangway....
