Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
Search Results "Non-Glare Finish"
-
11B-306.3.3 Minimum required depth
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
General: ADA Standard Section 306.2.1
Section 306.2.1 of the ADA Standards covers information in the current ADA Standards for toe clearance.
-
Producing Printed Material in Large Print
Here are some tips for producing large print documents: The best contrast with the least glare is bold type on yellow paper (white paper can produce too much glare)...
-
Speech Impairments
Speech Impairments People with speech impairments may stutter, slur words, sound hoarse, have unintelligible speech, or be non-vocal. ...
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
Can a disabled non-EV driver park in an ADA EVSE spot?
RESPONSE: The California Vehicle Code prohibits parking a vehicle in an EVCS. Vehicles left in EVCS spaces must be connected for charging purposes. DSA understands this applies to...
-
Signage (slide 11)
And then reverse contrast is better because you don’t have the glare from the background. They really should be solid at floor level, and, not shadowed, as you [lean in to read]....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
4. May an employer ask questions about an obvious hearing impairment, or ask follow-up questions if an applicant discloses a non-obvious hearing impairment?
May an employer ask questions about an obvious hearing impairment, or ask follow-up questions if an applicant discloses a non-obvious hearing impairment? No....
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
11B-603.4 Coat hooks, shelves and medicine cabinets
Shelves shall be located 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
Den
Pull-out keyboard and utility tray for seated users unable to use a laptop Non-slip oil finish on floor FSC certified maple floor in the den and dining room....
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
A6.) Methods of measurement are critical in determining both compliance and allowable tolerances. The industry’s standards are usually very clear about how to make their...
-
Height: ADA Standard Section 611.4
Section 611.4 covers the current ADA Standards for the height of the laundry compartment in top loading machines and front loading machines.
-
Minimum Required Depth: ADA Standard Section 306.3.3
Section 306.3.3 covers the current ADA Standards for the minimum required depth for knee clearance.
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
Viking Tactile Blue Braille and Raised Letter Sign
Blue PMS 300 Acrylic with non-glare finish, 0.032” thick double sided foam included....
-
11B-411.2.1.3.4 Position
Display screens and touch screens shall be positioned so glare is reduced on the screen. Keypads or buttons shall slope away from the user at 15 to 25 degrees from the vertical plane....
-
11B-411.2.1.3.4 Position
Display screens and touch screens shall be positioned so glare is reduced on the screen. Keypads or buttons shall slope away from the user at 15 to 25 degrees from the vertical plane....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
