operating devices, intended for use on required means of egress doors in other than Group R and M occupancies with an occupant load of 10 or less, shall comply with SFM Standard 12-10-2,...
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
1010.1.9.1 Hardware
-
11B-610.3.2 L-shaped seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
Bobrick Utility Hook B-6707
Flange is 2" x 2" (50 x 50mm). Hook 1⁄2" (13mm) wide, projects 2" (50mm) from wall....
-
Bobrick Utility Hook B-670
Flange is 2" x 2" (50 x 50mm). Hook 1⁄2" (13mm) wide, projects 2" (50mm) from wall....
-
Allegion LCN 1000 Surface Mounted Door Control
Tested and certified under ANSI Standard A156.4 grade one. Consult factory for details....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4 _|Alterations; Path...
-
Guest Rooms
0 2 51 to 75 3 1 4 76 to 100 4 1...
-
Playground Study Site
(Fig. 2). All roots, stones, and vegetation were removed....
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Chapter 2. Exceptions: 1. Reserved....
-
B.2.ii. - How should an agency proceed in identifying "applicable" technical provisions in Subparts B, C, and D of the Access Board’s standards to ensure acquired products provide comparable access?
Agencies should first look to the provisions in Subpart B to determine if there are specific technical provisions that apply to the EIT need they are seeking to satisfy. If there...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
Residential dwelling units shall comply with Section 11B-233.3.4.2. 2....
-
Assessment factors. (Section-by-Section Analysis)
Section 35.137(b)(2) now states that ‘‘[i]n determining whether a particular other power-driven mobility device can be allowed in a specific facility as a reasonable modification under (...
-
EXHIBIT F ADA Maintenance Checklist
___ Yes ___ No 2....
-
11B-213.2 Toilet rooms and bathing rooms
family) toilet room or bathing room complying with Section 11B-213.2.1 is provided and located in the same area and on the same floor as existing inaccessible toilet or bathing rooms. 2....
-
11B-805.4.3 Turning space
The Office of Statewide Health Planning and Development (OSHPD), which has jurisdiction over hospitals and long-term care facilities in California, issued Code Application Notice CAN 2-...
-
Pilot Rock BR102 Bollard Bike Rack
Series Overview Single post “bollard” type bike rack with parking for 2, 4, or 6 bikes of any style. Will work with most bike locking devices. Model BR102 will park 2 bikes....
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
Residential Dwelling Units for Sale: ADA Standard Section 233.3.2
Section 233.3.2 covers scoping requirements in the current ADA Standards for residential dwelling units for sale.
-
11B-608.3 Grab bars
office, and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3. 2....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Provisions to Test Nos. 1 and 2....
-
11B-410.8 Restriction sign
This section incorporates ASME A18.1-2003, sections 2 and 5 by reference, and requires compliance with CCR, Title 8, Sections 3094.2(d), 3094.2(e), 2094.2(g), and 3094.2(p)....
-
11B-228.3.2 Minimum number
Each combination of charging level (such as: AC Level 1, AC Level 2, DC Fast Charge) and EV connector type shall be considered as a facility....
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
Stair widths
However, 1014.8 discusses projections and allows projections into the required width of stairs up to 4 1/2" at or below the handrail height....
