3-hole 6-16″ installation Number of handles: 2 With Side Sprayer: No Valve Type: Washerless stem cartridge Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Red/Blue Indicator...
Search Results "Floor Destination Indicator"
- Delta Two Handle Widespread Lavatory Faucet 3579LF-WFHDF
- Delta Commercial Centerset Blade Faucet 2529LF-LGHDF
- AJW Architectural Products U124 40 oz. Horizontal Liquid Soap Dispenser - Surface Mounted
- Bradley 643 Standard Series Horizontal Recessed Soap Dispenser
- Rockwood Manufacturing Company 107 x 73B/73BL Concealed Mount Pull Plate 8" CTC Pull 3-1/2" x 15" Plate
- Delta Two Handle Centerset Lavatory Faucet 2529LF-HDF
- Oval Window Audio Induction Loop Receivers for Individuals without Telecoil-Equipped Hearing Aids
- Allegion XceedID® PR10 Proximity Mini-Mullion Reader
- Delta Two Handle Widespread Lavatory Faucet 3549LF-WFHDF
- Tork Elevation® Matic® Hand Towel Roll Dispenser, Black
- Armor-Tile Tactile Systems Surface Applied Systems
- Hill-Rom Golvo® 8000 / 8008 Patient Lift
-
1132A.8 Hand-activated door hardware
Hand-activated door latching, locking and opening hardware shall be centered between 30 inches (762 mm) and 44 inches (1118 mm) above the floor....
-
Handrail Extensions
If handrail extensions are provided, they do not need to be parallel with the ground or floor surface, since the surface may be moving due to water conditions....
-
308.2.2 Obstructed High Reach
Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction....
-
610.2 Bathtub Seats
The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor....
-
Openings, Width and Length of Wheelchair Space
Wheelchair spaces must have a clear width of 30 inches minimum and a clear length of 48 inches minimum, measured to at least 9 inches above the floor surface....
-
Adaptability
Rooms need to be designed to provide required clear floor space at fixtures, turning space, and door clearance....
-
Cross Slope and Surfaces [4.8.6]
Ramp surfaces must comply with requirements for ground and floor surfaces and be "stable, firm, and slip-resistant." A specific level of slip-resistance is not mandated....
-
Outdoor Conditions [4.8.8]
Wetness reduces slip-resistance, which is fully characterized not only by the ramp or floor surface but by the material making contact with it....
-
Stacks [8.5]
Stacks [8.5] Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more...
-
4.1.2(8)
(8) At least one principal entrance at each grade floor level to a building or facility shall comply with 4.14, Entrances....
-
1014.1 General
The technical requirements address the entrance to camp shelters (1014.2), including transfer access (1014.2.1) and roll-in access (1014.2.2); and the floor within camp shelters (1014.3)...