Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor....
Search Results "Floor Destination Indicator"
Filters
Commonly Searched Documents
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
1009.6.3 Size
Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
11B-233.3.6 Graduate student and faculty housing at a place of education
including, but not limited to, the provisions in sections 233 and 809. 1) In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor...
-
11B-216.13.3 Conditions of use
Floor or wall coverings, floor or wall covering adhesives, carpets, formaldehyde-emitting particleboard cabinetry, cupboards or doors have not been installed or replaced in the previous...
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
TM 2017-25 Door and Gate Surfaces Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish floor...
-
Lighting Contrast and Conceptual Design
And the whole [interior is] all white, clear white, everything white – the ceiling, the floor, the floor tiles, the wall, the columns, the furniture....
-
General [4.5.1]
Affected industries (floor finishes, ceramic tile, and plumbing fixtures) each employ a different testing method in designating the slip-resistance of their products....
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
-
11B-604.8.1.1 Size
shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and 59 inches (1499 mm) deep minimum for floor...
-
Executive Summary
Research in other countries, comments from the public, and demographic, social and technological trends indicate that there is a need for new current information on the anthropometry of...
-
4.1 Wheeled Mobility Device Dimensions
The data also indicates that armrest height and handle height vary considerably from the values included in standards but only for the extremes of the population (see figures 4-6)....
-
Attachment B – Code References
The types of buildings and facilities are: Office buildings and passenger vehicle service stations of three stories or more and 3,000 or more square feet (279 m2 ) per floor....
-
Passenger Loading Zones
The wide range of opinions expressed in these comments indicates that this provision is controversial....
-
Section 1630.10(a)—In General
Experience under a similar provision of the regulations implementing section 504 of the Rehabilitation Act indicates that challenges to selection criteria are, in fact, often resolved by...
-
Risk Cannot be Speculative or Remote
to disqualify persons who are currently able to perform the essential functions of a job, either with or without an accommodation, because of fear or speculation that a disability may indicate...
-
1. If a test screens out or tends to screen out an individual with a disability or a class of such individuals on the basis of disability, it must be job-related and consistent with business necessity
For example: a typing test, a sales demonstration test, or other job performance test would indicate what the individual actually could do in performing a job, whereas a test that measured...
-
Classroom Acoustics
Research indicates that high levels of background noise in classrooms compromises speech intelligibility for many children to such an extent that their reading, communication, and learning...
-
Reasonable Accommodation Process Illustrated
The sack handler indicates his or her preference for the dolly....
-
Truncated Domes
A commenter cited research conducted in Japan which indicated that a surface very similar to that specified by section 705 ranked high in detectability....
-
Signatures and Contact Information Page
. ______________________________________ UNITED STATES DISTRICT JUDGE Signatures indicating agreement to entry of this Consent Decree: For the United States of America: Date...
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
On pedestrian access routes, detectable warning surfaces indicate the boundary between a pedestrian route and a vehicular route where there is a flush rather than a curbed connection for...
-
4.3 Diagnostic Imaging Equipment
This diversity reflects the wide range of diagnostic tasks, clinical indications, and patient populations that imaging equipment is designed to serve, both for common diagnostic needs (e.g...