The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
Search Results "9-1-1 Service"
-
11B-609.3 Spacing
-
Accessibility - Flatness and Lippage
Conformance to this standard requires that subfloor surfaces conform to the following: no variation greater than 1/4" in 10 feet, nor 1/16" in 1 ft. from the required plane....
- Easter Seals Wisconsin
-
ii. Web accessibility under the ADA
corresponding regulations define a "place of public accommodation" as a facility whose operations affect commerce and that falls within at least one of the following 12 categories: (1)...
-
Conclusion
There is a clear distinction between 49 CFR § 37.43(a)(1) and (a)(2)....
-
1017.7.1 Maximum Running Slope and Segment Length
This section requires that not more than 30 percent of the total length of a trail have a running slope steeper than 1:12 (8.33%), and that the running slope of any segment of a trail not...
-
11B-216.5.1 Parking spaces
Exceptions: 1. Reserved. [2010 ADAS] 1. ...
-
11B-216.5.1 Parking spaces
Exceptions: 1. Reserved. [2010 ADA Standards] 1....
-
4.5.3 Slope
The slope of the clear floor or ground space for trash, recycling, and other essential containers shall not exceed 1:48 (2 percent) in any direction. Exception....
-
APPENDIX A
[ ] <300 feet (1 block, 90 meters) [ ] 300 to 3000 feet (1-10 blocks, 90-1000 meters) [ ] 3000 to 5000 feet (10-17 blocks, 1000-1600 meters) [ ] 5000 to 10,000 feet (1-2 miles,...
-
Appendix B to Part 35—Guidance on ADA Regulation on Nondiscrimination on the Basis of Disability in State and Local Government Services Originally Published July 26, 1991
For the convenience of the reader, this appendix contains the text of the preamble to the final regulation on nondiscrimination on the basis of disability in State and local government services...
-
Alteration
Normal maintenance, reroofing, painting or wallpapering, asbestos removal, [36.402(b)(1)] or changes to mechanical and electrical systems are not alterations unless they affect the usability...
-
Location: ADA Standard Section 407.4.6.1
Section 407.4.6.1 covers the current ADA Standards for the location of elevator car controls.
-
General: ADA Standard Section 229.1
Section 229.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for windows.
-
ACCESSIBLE ROUTE
[DSA-AC & HCD 1-AC] A continuous unobstructed path connecting accessible elements and spaces of an accessible site, building or facility that can be negotiated by a person with a disability...
-
11B-1005.1 Accessible routes
Exceptions: Accessible routes serving floating fishing piers and platforms shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in Section 11B-1003.2.1....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic-control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and a 1-...
-
1.1.8.2 Locally adopted energy standards - California Energy Code, Part 6.
Applicable provisions of Public Resources Code Section 25402.1(h)(2) and applicable provisions of Section 10-106, Chapter 10 of California Administrative Code, Part 1 apply to locally adopted...
-
11B-1005.1 Accessible routes
Exceptions: Accessible routes serving floating fishing piers and platforms shall be permitted to use Exceptions 1, 2, 5, 6, 7 and 8 in Section 11B-1003.2.1....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic-control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and a 1-...
-
ACCESSIBLE ROUTE
[DSA-AC & HCD 1-AC] A continuous unobstructed path connecting accessible elements and spaces of an accessible site, building or facility that can be negotiated by a person with a disability...
- Guldmann GH3+ Lifting Module with Scale
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...