Section 4.2.6 of the 1991 Standards specifies a maximum 54-inch high side reach and a minimum 9-inch low side reach for an unobstructed reach depth of 10 inches maximum....
Search Results "Minimum Dimension"
-
Reach Ranges
-
224.5 Dispersion
Where the minimum number of guest rooms required to comply with 806 is not sufficient to allow for complete dispersion, guest rooms shall be dispersed in the following priority: guest room...
-
233.1 General
In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3. 2....
-
Trailhead Information Signs [F216.13 and 1017.10]
The new trail information signs must include the following information: Length of the trail or trail segment Type of trail surface Typical and minimum trail tread...
-
Amenities
Door openings shall provide a clear width of 32 inches minimum....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
Attachment E
On the shortest accessible route to the accessible entrance, provide at least 1 van accessible space a minimum of 96 inches wide, served by an access aisle at least 96 inches wide, with...
-
Panda S.65 All Aluminum with Aluminum/Wood Clad Multi-Slide Door System
Configurations Available: Systems can pocket to left or right, and can stack to left and/or right. 45 and 90 degree configurations are available, as well as panoramic with a radius of minimum...
-
Pilot Rock PQT3-4 Square Pedestal Table Using Aluminum
Table offers 32" table height, 20" seat height (nominal dimensions). FRAME: Supported by one central, massive 5-3/8" sq. steel post. ...
-
Door King Inc. 9100 Slide Gate Operator Residential & Commercial
Dimensions: 12"W x 24"H x 11.5"D Options: Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
-
Atlantis Railing
Note: Railing heights are offered in these dimensions due to nationwide building codes. However, Atlantis Rail can supply custom heights/lengths upon request....
-
Salsbury Industries Designer Wood Locker Single Tier 1 Wide
lift up handle and recessed hasp for added security Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Compartment Dimensions...
-
Salsbury Industries Designer Wood Locker Single Tier 3 Wide
lift up handle and recessed hasp for added security Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Compartment Dimension...
-
Door King Inc. 1150 Overhead Gate and Door opener
Dimensions: 21"W x 10.5"H x 149"- 221"L (Length depends on rail assembly ordered)....
-
Healthcraft Invisia ADA Serenaseat™ Folding Shower Seat
Product shall comply with ADA Guidelines, specifically the dimensions and structural strength of the shower seat. ...
-
Stanley Access Technologies Dura-Care 7200 Manual Sliding Door
Available TYPICAL WIDTH: 2-Panel | OPTION: 84" TO 108"; Clear Door Opening: 2-Panel (Standard) 35 1/4" to 47 1/4" HEADER SIZE: 4" BREAKOUT: Sliding Panel Breakout, Any Position JAMB DIMENSION...
-
Section 35.151(c) Accessibility standards for new construction and alterations
Section 204 of the ADA, 42 U.S.C. 12134, directs the Attorney General to issue regulations to implement title II that are consistent with the minimum guidelines published by the Access Board...
-
Section 35.151(c) Accessibility standards for new construction and alterations (Section-by-Section Analysis)
Section 204 of the ADA, 42 U.S.C. 12134, directs the Attorney General to issue regulations to implement title II that are consistent with the minimum guidelines published by the Access Board...
-
1. Public Rights-of-Way
The guidelines cover the minimum scoping and technical requirements for various spaces and elements in the public right-of-way, such as pedestrian access routes, which ensure the accessibility...
-
1. Public Rights-of-Way
The guidelines cover the minimum scoping and technical requirements for various spaces and elements in the public right-of-way, such as pedestrian access routes, which ensure the accessibility...
-
1117B.5.6
Dots shall be raised a minimum of 1/40 inch (0.635 mm) above the background. Braille dots shall be domed or rounded....
