Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....
Search Results "Kitchen Work Surface"
-
11B-1009.5.7 Grab bars
-
§ 38.159(c)(8) Handrails
grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches (760 mm) above the ramp surface...
-
11B-1009.5.7 Grab bars
Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
1002.5 Amusement Ride Seats Designed for Transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
1134A.6, Item 2
The floor surfaces shall be of Carborundum or grit-faced tile or of material providing equivalent slip resistance....
-
T405.3 Visual Contrast
The stripe shall be 1 inch (25 mm) wide minimum and shall contrast visually with the rest of the step tread or circulation path surface either light-on-dark or dark-on-light....
-
R405.3.4 Clearance Reduction
Between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface, the knee clearance shall be permitted to reduce at a rate of 25 mm (1 in) in depth for each 150 mm (6 in) in height....
-
6.10 Openings
Openings in the surface of beach access routes and their related resting intervals may be up to 1/2 inch (13 millimeters) wide....
-
1134A.6, Item 2
The floor surfaces shall be of Carborundum or grit-faced tile or of material providing equivalent slip resistance....
-
11B-809.10.6.2 Slope
The floor surfaces shall be of Carborundum, grit-faced tile or of material providing equivalent slip resistance....
-
Don-Jo Mfg., Inc. 2-3/4" Hospital Latch 4500
Number 4500 Back set 2-3/4" Material Brass Size 2-3/4" x 4-1/2" Shelf pack 1 Features UL Listed, Works...
-
1.9.1.1.5
In such cases, the code in place on the date of any construction would be the effective code for such work....
-
QUESTION: WHAT MEANS MAY BE USED TO COMMUNICATE WITH COMPLAINT RESOLUTION OFFICIALS (CROs)?
For example, a variety of electronic means of communication could work....
-
TECHNIQUES FOR OFFICERS TO COMMUNICATE EFFECTIVELY
Officers must review and have a working knowledge of the publication Communicating with People Who Are Deaf or Hard of Hearing: ADA Guide for Law Enforcement Officers. ...
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
2. HOW TO MAKE THE RIGHT CHOICES IN EVALUATING NEW MEDICAL OFFICE
SPACE
This lack of accessibility makes it impossible for many people with disabilities to take part in everyday activities such as going to work, eating in a restaurant or shopping in a store....
-
Vocational Rehabilitation Gains Momentum
Targeting people who could proceed or return to work with assistance, VR helps thousands of people obtain employment....
-
DEFINITIONS AND OPERATIONAL CHARACTERISTICS OF ROAD AND TRAIL USERS
DEFINITIONS AND OPERATIONAL CHARACTERISTICS OF ROAD AND TRAIL USERS This section provides a working definition of each user group....
-
68.10(16) Issue
In the case of a state-funded or other public works project, it is the time at which plans or specifications are publicly posted for bids, after such plans or specifications have been sealed...
-
UNREASONABLE HARDSHIP
When the enforcing agency finds that compliance with the building standard would make the specific work of the project affected by the building standard infeasible, based on an overall evaluation...
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4.◼...
-
1.9.1.1.5
In such cases, the code in place on the date of any construction would be the effective code for such work.◼...
