When it comes to strength, the Yale® 8800 series brings a new measure of security to the door....
Search Results "Unit of Measurement"
- Yale 8800 Series Grade 1 Mortise Locks
- Bradley Surface Mounted Tank-Type Vertical Valve Soap Dispenser 6562
- Bradley Surface Mounted, Horizontal Tank, Horizontal Valve Soap Dispenser 6542
- Bradley Soap Dispenser With ABS Plastic Valve 6563
-
4.1 Introduction
decision about who should be accommodated by knee and toe clearances or identify alternative solutions like providing side access as well as front access or at least one fully accessible unit...
- Audio Description Associates Audio Description Services
- Bobrick Surface-Mounted Toilet Tissue Dispenser with Hood B-6699
- Bradley 3 Station Verge Lavatory System LVRD3
-
Arriving at the Polling Place: Parking
(See Part 2 of this document for tips on measuring slopes and cross slopes.) Parking requirements are in Section A of the 2016 Checklist found in Part 3 of this document....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
Services and Facilities
Under Title II, a public entity must ensure that its program as a whole is accessible; this may entail removing architectural barriers or adopting alternative measures, such as relocating...
-
Mounting Height and Location
Such signs are to be mounted so that the tactile elements (raised characters and braille) are between 48 to 60 inches high, measured to the baseline of characters. Comment....
-
Toilet Paper Dispensers
This may effectively preclude some dispensers from being located above grab bars in view of the minimum mounting height of grab bars (33 inches, measured to the top of the gripping surface...
-
Ground-Level Accessible Routes
At ground level, objects may not protrude into the 60-inch wide space of an accessible route up to or below the height of 80 inches (2030 mm), measured above the accessible route surface...
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
Illustration of measurement height at bolsters relative to lower transfer surface...
-
R410.6 Character Height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
ATMs. (Section-by-Section Analysis)
The Department believes that the limitations on the effective communication requirements, which provide that a covered entity does not have to take measures that would result in a fundamental...
-
2.1.3. Baseline
To estimate the incremental cost impact, the total costs are measured against a baseline. ...
-
MISCELLANEOUS PROVISIONS
Reports will include detailed photographs showing measurements, architectural plans, work orders, notices published in the newspaper, copies of adopted policies, and proof of efforts to...
-
¼ Inch Minus Limestone
Eventually, the surface developed an erosion ditch measuring approximately 16 feet and at a depth of approximately 3 inches....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
- Marc Dubin, Esq.
- U.S. Department of Justice (DOJ)
