The proposed rule required a minimum clearance of 6 inches high measured from the floor and 36 inches deep measured from the edge of the examination surface. NPRM, 77 FR at 6927....
Search Results "Unit of Measurement"
-
M301.4.2 Clearance Around Base (Section-by-Section Analysis)
-
5.1.1 Transfer Surface Height Adjustability Recommendation for M301 and M302
In determining these heights, project researchers measured the seat heights from underneath the buttocks at the center of the occupied seats, a spot likely to be lower than the front of...
-
Safe harbor for qualified small businesses regarding what is readily achievable. (Section-by-Section Analysis)
Advocacy groups both for individuals with disabilities and private businesses requested specific guidance on what measures were required for barrier removal. ...
-
2.1 Participant Recruitment and Sampling
Researchers at each of these sites were trained in the data collection methods and used the same measurement equipment to ensure consistency in measurement methods across sites....
-
4.3.5.3 180-degree turn around an obstacle
Findings from the Anthropometry of Wheeled Mobility Study indicate that a uniform width of at least 89.5 cm (35 in.) was required for 50% of the manual and power wheelchair users measured...
-
Location and Size
The side rails are 20 inches minimum in length, 6 inches minimum in height above the table surface, and 1 inch measured horizontally from the adjacent edge of the table surface....
-
seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
Just press the SEND key to transmit measurements wirelessly to a seca digital printer with wireless reception or the PC....
-
Bobrick Heavy-Duty Clothes Hook B-211
Unit projects 3 7⁄16" (85mm)....
-
Section 36.301 Eligibility Criteria (Preamble, Section-by-Section Analysis)
§ 36.301 provides that public accommodations may not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the costs of measures...
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
MDE manufacturers believe that their usability requirements should include some measure of accessibility....
-
B. Survey, Compliance and Review of Polling Place Locations
Department concludes that the Board or the ThirdParty Expert has proposed a remedial provision that does not address the violation, then the Department will recommend a temporary remedial measure...
-
Section 36.301 Eligibility Criteria (Section-By-Section Analysis and Response to Comments)
Sec.36.301 provides that public accommodations may not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the costs of measures...
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
A Word about Benefit Programs
All over the United States there are organizations called Independent Living Centers that provide information about benefit programs and other services for people with disabilities....
-
R302.7.2 Vertical Surface Discontinuities
Vertical surface discontinuities between unit pavers should be minimized....
-
Facilities Specializing in Services for Persons with Mobility Impairments
The 20% scoping applies to facilities or units that specialize in providing services to people with "mobility impairments,” which may include: * conditions requiring the use or assistance...
-
Shower Stalls [4.21]
., dwelling units, dormitories, rehabilitation facilities). A folding seat in a roll-in shower offers greater flexibility by allowing transfer as well....
-
Text Telephones (or TTYs) [4.31.9]
Typed messages are converted into audible tones transmitted through the phone line to a receiving unit. Early models were known as TTYs (from their origin in teletype technology)....
-
4.2. Sensitivity Analysis
Alternate Medium Accessibility baseline; Alternate captioning and audio description device replacement rates; Increased staff training frequency; Single-Auditorium unit...
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
Actions to Be Taken by LCG
LCG shall adopt and implement the revised policies and procedures within fifteen (15) days of the United States’ approval. ...
-
Bobrick ConturaSeries Surface-Mounted Sanitary Napkin Disposal B-270
Unit 7 1/2" W, 10" H, 3 13/16" D (190 x 255 x 95mm)....
-
Mega Jailhouse Vandal Resistant/Security Toilet Paper Holder
This heavy duty, vandal resistant, stainless steel toilet paper holder is a single incremental unit that cannot be removed or conceal contraband. ...
-
Letter from The Assistant Secretary
UNITED STATES DEPARTMENT OF EDUCATION OFFICE FOR CIVIL RIGHTS THE ASSISTANT SECRETARY Dear Superintendents and Other School Administrators: Thank you for the essential...
