• The low energy costs for manual wheelchair users on surfaces that were objectively measured as firm and stable increase dramatically on the surfaces that were not measured as firm...
Search Results "Measuring Instrument"
-
CONCLUSIONS
-
5.8.2.8 Knee and Toe Clearance Recommendations Summary
Clearance Recommendations Summary Ultimately, all of the knee and toe clearance recommendations in sections 5.8.2.1 – 5.8.2.7 are summarized below, in Figure 5.8.2.8, which shows the measurements...
-
Highway standards suggesting possible applications for pedestrian surfaces
ASTM E 950-98(2004) Standard test method for measuring the longitudinal profile of traveled surfaces with an accelerometer established inertial profiling reference...
-
§ 36.304(d)(3)
achievable, a public accommodation may take other readily achievable measures to remove the barrier that do not fully comply with the specified requirements....
-
Nova Health Products LiteRamp 5' Wheelchair and Scooter Ramp (LR5)
walkers, curbs, decks, steps Other uses: Dogs, mini horses, lawn mowers, steam generators, copy machines, DJ equipment, janitor's equipment, BBQ stoves, concrete floor grinders, medical instruments...
-
Nova Health Products LiteRamp 2' Wheelchair and Scooter Ramp (LR2)
walkers Curbs, decks, steps Other uses: Dogs, mini horses, lawn mowers, steam generators, copy machines, DJ equipment, janitor's equipment, BBQ stoves, concrete floor grinders, medical instruments...
-
Nova Health Products LiteRamp 4' Wheelchair and Scooter Ramp (LR4)
walkers, curbs, decks, steps Other uses: Dogs, mini horses, lawn mowers, steam generators, copy machines, DJ equipment, janitor's equipment, BBQ stoves, concrete floor grinders, medical instruments...
-
Nova Health Products LiteRamp 3' Wheelchair and Scooter Ramp (LR3)
walkers, curbs, decks, steps Other uses: Dogs, mini horses, lawn mowers, steam generators, copy machines, DJ equipment, janitor's equipment, BBQ stoves, concrete floor grinders, medical instruments...
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.2.2
Section 608.2.2 covers the current ADA Standards for the size of standard roll-in type shower compartments.
-
Alignment: ADA Standard Section 802.3.1
The shoulder alignment point of the wheelchair space shall be measured 36 inches (915 mm) from the front of the wheelchair space....
-
11B-802.3.1 Alignment
The shoulder alignment point of the wheelchair space shall be measured 36 inches (914 mm) from the front of the wheelchair space....
-
11B-802.3.1 Alignment
The shoulder alignment point of the wheelchair space shall be measured 36 inches (914 mm) from the front of the wheelchair space....
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.2.3
Section 608.2.3 covers the current ADA Standards for the size and clearances of alternate roll-in type shower compartments.
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
Husky 10" Multi-Function Standard Digital Level
The digital display is easy to read. 3 measurement units and audible signals make it suitable for a variety of tasks....
-
11B-404.2.4.3 Recessed doors and gates
457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects more than 8 inches (203 mm) beyond the face of the door, measured...
-
11B-404.2.4.3 Recessed doors and gates
457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects more than 8 inches (203 mm) beyond the face of the door, measured...
-
Seeger et al.
Both unoccupied and occupied dimensions of device width and length were measured as well as a set of other basic dimensions....
-
1.2.7
1.2.7 When local variations (flatness) for cross slope of ramps are measured according to 1.1.14 at least 80% (rounded to the nearest whole number) should not exceed a 2% slope....
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Original research for ANSI A117.1 (1957 - 1961)
1961, American National Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by, the Physically Handicapped, ramps were assessed for flatness based on measuring...
-
3.3.5 Seat Height
The reference points used for measurement can yield quite different results for seat height....
-
C. Training
, including: (a) why such measures are necessary; (b) how the measures must be implemented (e.g., how to install ramps, the placement of mats over (and not in front of) thresholds); and...
