The space shall be permitted to include knee and toe clearance complying with Section 11B-306 only at the end of either the base or one arm....
Search Results "Handrail Clearance"
-
11B-304.3.2 T-Shaped space
-
d-iv
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
f-vii
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
4c.
Are the handrails mounted between 34 and 38 inches above the ramp surface? [ADA Stds 4.8.5] Yes _____ No _____...
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADA Standards] 502.5 Vertical Clearance....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADA Standards] 502.5 Vertical Clearance....
-
11B-607.2 Clearance
A lavatory complying with Section 11B-606 shall be permitted at the control end of the clearance....
-
11B-607.2 Clearance
A lavatory complying with Section 11B-606 shall be permitted at the control end of the clearance....
-
Railings: ADA Standard Section 1005.2
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
306.3 Knee Clearance
306.3 Knee Clearance....
-
306.2 Toe Clearance
306.2 Toe Clearance....
-
R405.3 Knee Clearance
R405.3 Knee Clearance...
-
R405.2 Toe Clearance
R405.2 Toe Clearance...
-
306.3 Knee Clearance
306.3 Knee Clearance....
-
306.2 Toe Clearance
306.2 Toe Clearance....
-
11B-1005.2 Railings
Where provided, railings, guards, or handrails shall comply with Section 11B-1005.2....
-
11B-1005.2 Railings
Where provided, railings, guards, or handrails shall comply with Section 11B-1005.2....
-
306.2 Toe Clearance
Figure 306.2 Toe Clearance...
-
306.3 Knee Clearance
Figure 306.3 Knee Clearance...
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....
-
R409.9 Fittings
Handrails shall not rotate within their fittings. Where expansion joints are necessary for large spans of handrails, the expansion joint is permitted to rotate in its fitting....
-
R409.3 Continuity
Handrails shall be continuous within the full length of each ramp run or stair flight....
-
Eliminating Hazards [4.26.4]
Eliminating Hazards [4.26.4] Handrails, grab bars, and adjacent surfaces cannot have any sharp or abrasive elements....