In the final rule, the Board has clarified that companion seats are to be located to provide shoulder alignment with adjacent wheelchair spaces (802.3.1)....
Search Results "ALI: Automatic Location Identification"
Filters
Commonly Searched Documents
-
Companion Seats
-
1. Providing Equal Access With Auxiliary Aids and Services
Title II of the ADA requires government entities to make appropriate auxiliary aids and services available to ensure effective communication.4 You also must make information about the location...
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the line at the face of the curb marking the transition...
-
Examples of effective communication are:
At a grocery store, a staff person can assist a person with vision loss by locating and retrieving items from the shelves or reading price and content information to him or her....
-
Policies and Procedures
If security is a problem, an accessible call box or buzzer (identified by a sign and mounted in an accessible location and height) should be installed to enable people with disabilities...
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
Substantive changes made to requirements for elevators
Substantive changes made to requirements for elevators in section 407 include: revision of the height of call controls (407.2.1.1) removal of a specification concerning objects located...
-
M301.2.1 Adjustability (Section-by-Section Analysis)
height to be adjustable to: (1) a low transfer height of 17 inches minimum and 19 inches maximum; (2) a high transfer height of 25 inches; (3) at least four additional transfer heights located...
-
1002.5 Amusement Ride Seats Designed for Transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
Maneuvering Space
directions by making a series of multi-point turns Slope not steeper than 1:48 in all directions As an example, maneuvering space is required for swings and may be located...
-
604.3.2 Overlap
No other fixtures or obstructions shall be located within the required water closet clearance....
-
308.1 General
Accessible elements and operable parts designed for adult use or children over age 12 can be located outside these ranges but must be within the adult reach ranges required by 308. ...
-
F221.4 Designated Aisle Seats
At least 5 percent of the total number of aisle seats provided shall comply with 802.4 and shall be the aisle seats located closest to accessible routes....
-
604.7 Dispensers
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
Reservations
If an unexpected problem occurs that makes it impossible for the hotel to provide the accessible room promised, the hotel should make every reasonable effort to locate a comparable accessible...
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-04 Signs - Exit Doors
However, a RAS has no authority to require compliance with TAS 216.4.1 based on RAS Bulletin 2012-01 since a referenced standard (ICC/IBC) dictates the location of exit passageway, exit...
-
Technical Memorandum TM 2013-10 Clustered Toilet Rooms
213.2, Exception 4 does not apply to multiple single user bathing or shower rooms; therefore, this Exception is applicable only to multiple single user toilet rooms clustered at a single location...
-
d. i.
Provide doors that require no more than 5 lbf to push or pull open at the following locations: (1) Spy City Café men's and women's toilet rooms; (2) Main Lobby restrooms vestibule;...
-
308.1 General
Accessible elements and operable parts designed for adult use or children over age 12 can be located outside these ranges but must be within the adult reach ranges required by 308....
-
Surface, Slope, and Openings [1011.2.2, 1011.2.3, and 1011.2.4]
Where possible, drainage grates should be located outside the clear ground space and elongated openings should be placed perpendicular, or as close to perpendicular as possible, to the dominant...
-
5.4.5 Transfer Support Position Recommendation for M301 and M302
The Committee recommends a gripping surface be located within the minimum and maximum heights....
-
R201.1 Scope
All newly constructed facilities, altered portions of existing facilities, and elements added to existing facilities for pedestrian circulation and use located in the public right-of-way...
-
R202.3.4 Alterations to Qualified Historic Facilities
Location of a facility within an historic district by itself does not excuse compliance with the requirements in this document....
-
1002.5 Amusement Ride Seats Designed for Transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....