The advisory committee members provided feedback on the categories of surfaces to be evaluated, the criteria to be used for evaluation, the locations within each playground to be evaluated...
Search Results "ALI: Automatic Location Identification"
Filters
Commonly Searched Documents
-
II. Research Methodology
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the line at the face of the curb marking the transition...
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-209.4 Valet parking
In addition, when valet parking is provided, a passenger drop-off and loading zone complying with Section 11B-503 shall be located on an accessible route of travel to the entrance of the...
-
§ 38.23(d)(4) Orientation
Additional securement locations shall be either forward or rearward facing with a padded barrier. Such barriers need not be solid provided equivalent protection is afforded....
-
11B-308.1 General
Accessible elements and operable parts designed for adult use or children over age 12 can be located outside these ranges but must be within the adult reach ranges required by 308. ...
-
11B-307.2 Protrusion limits
Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects....
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-308.1 General
Accessible elements and operable parts designed for adult use or children over age 12 can be located outside these ranges but must be within the adult reach ranges required by Section 11B...
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
11B-209.4 Valet parking
In addition, when valet parking is provided, a passenger drop-off and loading zone complying with Section 11B-503 shall be located on an accessible route of travel to the entrance of the...
-
11B-307.2 Protrusion limits
Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects....
-
Re: 11B-216.6 Entrances
Directional signs complying with Section 11B-703.5 that indicate the location of the nearest entrance complying with Section 11B-404 shall be provided at entrances that do not comply with...
-
Scoping for Guest Rooms
portable equipment satisfying this standard were available, there is still a key concern that their installation, when not supervised by a trained professional, would not guarantee proper location...
-
2. Standing Supports
For horizontal standing supports, the Access Board proposed a gripping surface of 4 inches long minimum, the top of which would be required to be located 34 inches minimum and 38 inches...
-
M305.2.3 Height (Section-by-Section Analysis)
the MDE Advisory Committee’s recommendations, and has decided to include a new provision, M305.2.3 in the final rule, that requires the tops of transfer support gripping surfaces to be located...
-
Guest Bathrooms
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
Benches
Consider the visitors who will use a particular area when deciding where to locate an armrest....
-
11. Fixing my business will be too expensive; therefore, I am unable to do anything to reduce my risk.
Furthermore, the Construction-Related Accessibility Standards Compliance Act (CRASCA) barrier at the location SB 1186 (Steinberg 2012) reduced statutory damage amount....
-
AJW Architectural Products U169 Series Lever Operated, Roll Towel Dispenser - Surface Mounted
Unit is equipped with an automatic stub roll transfer. Lock: Pin tumbler, commercial quality lock, keyed like all other AJW cabinets....
-
Delta Single Handle Lavatory Faucet with Touch2O.xt™ Technology 592T-DST
your hands within the 4 in. sensing field around the faucet Turns on and off with just a touch anywhere on the spout or handle On-off indicator light signals when batteries run low Automatic...
-
Delta Single Handle Pull-Down Kitchen Faucet with Touch2O Technology 9197T-DST
Touch activated faucet featuring Touch2O Technology Turns on and off with just a touch anywhere on the spout or handle On-off indicator light signals when batteries run low Automatic...
-
Delta Single Handle Lavatory Faucet with Touch2O.xt™ Technology 538T-DST
your hands within the 4 in. sensing field around the faucet Turns on and off with just a touch anywhere on the spout or handle On-off indicator light signals when batteries run low Automatic...
