Toe clearance shall be provided and shall be 30 inches (760 mm) wide minimum and 9 inches (230 mm) minimum above the ground or deck surface beyond the railing....
Search Results "9-1-1 Service"
-
Extended Ground or Deck Surface: ADA Standard Section 1005.3.2
-
11B-1005.3.2 Extended ground or deck surface
Toe clearance shall be provided and shall be 30 inches (762 mm) wide minimum and 9 inches (229 mm) minimum above the ground or deck surface beyond the railing....
-
11B-1005.3.2 Extended ground or deck surface
Toe clearance shall be provided and shall be 30 inches (762 mm) wide minimum and 9 inches (229 mm) minimum above the ground or deck surface beyond the railing....
-
Delta Two Handle Widespread Lavatory Metal Pop-Up 3594-MPU-DST
assembly Meets standards set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa 3-hole 4-16 in. installation Rigid spout Assembled dimensions: 5-1/...
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
§1630.9(e)
absent undue hardship, to provide a reasonable accommodation to an otherwise qualified individual who meets the definition of disability under the “actual disability” prong (§1630.2(g)(1)...
-
1134A.6, Item 5
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
§35.130(b)(2) (Section-by-Section Analysis)
Provision of segregated accommodations and services relegates persons with disabilities to second-class status....
-
1.1.1 Measurement tools
Distance measuring devices should be capable of measuring to a precision of 1/16 in. (1 mm)....
-
3.1 Graphic Conventions
Graphic conventions are shown in Table 1. Dimensions that are not marked minimum or maximum are absolute, unless otherwise indicated in the text or captions....
-
C. First Advance Notice of Proposed Rulemaking (2010)
1. General Based on the TEITAC Report, the Board developed an Advance Notice of Proposed Rulemaking in 2010 (2010 ANPRM) to update the 508 Standards as well as the 255 Guidelines....
-
Future Research Needs
One recurring question during these projects has been whether the creation of access services can be shared across cultural institutions as a way of addressing the limited resources of each...
-
TownSteel MSE-32-II Classroom Intruder with Indicator on Inside Mechanical Mortise
The escutcheon is 29/64" in projection, 8-5/32" in height and 2-9/32" in width. Available in three types Labels - "SECURE/UNSECURE", "OCCUPIED/VACANT", and " LOCKED/UNLOCKED....
-
Vehicle Parking
In such a 10-car parking lot, 9 parking spaces would be standard width and 1 would be 16 feet (4.88 meters) wide to comply with the van-accessible specifications of an 8-foot (2.44-meter...
-
b. A Qualified Person with a Disability
A “qualified individual with a disability” is someone who meets the essential eligibility requirements for a program, service or activity with or without (1) reasonable modifications to...
-
§104.36 Procedural safeguards.
with respect to actions regarding the identification, evaluation, or educational placement of persons who, because of handicap, need or are believed to need special instruction or related services...
-
ADA Standards for Accessible Design
ADA Standards for Accessible Design ________________________________________________________________ 9/15/2010 The U.S....
-
A. Measuring Slope and Cross Slope
There are three primary ways to determine a given slope: 1. Hire a land surveyor to shoot grades; 2. Use a digital "slope meter"; and, 3....
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
Features & Benefits Seals absorb limited serviceable seismic movement Frames allow for a smooth transition over joint for wheeled equipment Designed for 1/...
-
68.74. Continuing Education
(New section effective March 1, 2007, 32 TexReg 884; amended effective April 14, 2008, 33 TexReg 2931; amended effective March 15, 2012, 37 TexReg 677) (a) Terms used in this section...
