The slope of the surface of the clear ground space shall not be steeper than 1:48 (2 percent) in any direction....
Search Results "9-1-1 Service"
Filters
Commonly Searched Documents
-
5.1.8 Slope
-
11B-404.2.4.4 Floor or ground surface
Exceptions: 1. Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with Section 11B-404.2.5 shall be permitted....
-
1009.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 in the area of refuge shall activate both a light in the area of refuge indicating that rescue...
-
8.2.2 Stimuli
The following is a brief description of how the three types of stimuli were prepared: 1. Reverberation plus noise....
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Detailed Age Demographics
For phase 1 there were more people clustered around the 45-65 age range, skewing the histogram slightly to the right (Figure D1)....
-
ii. Web accessibility under the ADA
corresponding regulations define a "place of public accommodation" as a facility whose operations affect commerce and that falls within at least one of the following 12 categories: (1)...
-
Q14: Does the Amendments Act affect the situation in which a parent or guardian believes that his or her child has a disability and is not receiving special education or related services as described in the Section 504 regulation?
If a parent or guardian of a child with an impairment believes that the child may be a student with a disability and therefore requires services that he or she is not currently receiving...
-
AJW Architectural Products U2614 Unidoor Multifold Towel & Soap Dispenser Combination - Recessed
with #4 satin finish Unit features Uni-door construction Holds 475 multifold towels Product Specs Uni-Door: Fabricated of #18 gauge stainless steel with a #4 satin finish and 1/...
-
4.13.8* Thresholds at Doorways
Thresholds at doorways shall not exceed 3/4 in (19 mm) in height for exterior sliding doors or 1/2 in (13 mm) for other types of doors....
-
19. Please indicate the duration of the warranty/guarantees offered for the surface product used by the sales representative/vendor
Less than 1 year Between 1 year and 2 years More than 2 years, but 5 years or less No warranty/guarantees Unknown Other (please specify)...
-
4.13.8* THRESHOLDS AT DOORWAYS
Thresholds at doorways shall not exceed 3/4 in (19 mm) in height for exterior sliding doors or 1/2 in (13 mm) for other types of doors....
-
11B-201.1 Scope
All areas of newly designed and newly constructed buildings and facilities and altered portions of existing buildings and facilities shall comply with these requirements."1 1 "These...
-
Inquiries About Attendance
For example: "Our regular work hours are 9 to 5, five days weekly, but we expect employees in this job to work overtime, evenings, and weekends for 6 weeks during the Christmas season and...
-
1121B.3.1, Item 12
intercity rail, high speed rail and other fixed guideway systems (for example, automated guideway transit, monorails, etc.) shall comply with the following provisions, as applicable: 1...
-
3.3.4. Audio Description Device Scoping Requirements
Number of Auditoriums* Minimum Number of Audio Description Devices Required Per Venue Type Megaplex (16+ auditoriums) 18 9...
-
Pressalit Care PLUS - Bathroom Product Range Overview
Available in 9 colours, White, Anthracite, Pale Umber, Pale Blue, Dark Blue, Lime Green, Orange, Red and Purple....
-
1017.1 General
EXCEPTIONS: 1. ...
-
Technical Memorandum TM 2012-04 Multi-Story Buildings and Facilities
TM 2012-04 Multi-Story Buildings and Facilities: Effective Date: November 15, 2012 2012 TAS Reference: 206.2.3, Exception 1 – Private Buildings and Facilities The following...
-
Technical Memorandum TM 2012-07 Press Boxes
TM 2012-07 Press Boxes Effective Date: January 22, 2013 2012 TAS Reference: 206.2.7, Exception 1 and 2 The following clarifications are provided to address references to...
-
1017.1 General
EXCEPTIONS: 1....
-
1.1.1
For example, the 1:12 slope stated in ADAAG and ADA/ABAAG is a maximum slope for ramps, not a design requirement....
-
Accessibility - Flatness and Lippage
Conformance to this standard requires that subfloor surfaces conform to the following: no variation greater than 1/4" in 10 feet, nor 1/16" in 1 ft. from the required plane....
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
