(b) If portions of the vehicle are modified in a way that affects or could affect accessibility, each such portion shall comply, to the extent practicable, with the applicable provisions...
Search Results "Vehicle Pull-Up Space"
Commonly Searched Documents
- 
    
  
  § 38.51(b)
  
- 
    
  
  11B-502.2 Vehicle spaces
  Car and van parking spaces shall be 216 inches (5486 mm) long minimum.... 
- 
    
  
  11B-502.2 Vehicle spaces
  Car and van parking spaces shall be 216 inches (5486 mm) long minimum.... 
- 
    
  
  § 38.29(f)
  (f) For vehicles in excess of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches.... 
- 
    
  
  Audible Signals: ADA Standard Section 407.2.2.3
  Section 407.2.2.3 covers the current ADA Standards for elevator audible signals. 
- 
    
  
  Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People
  Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People [sic]... 
- 
    
  
  § 38.23(b)(2)(ii) Exception
  Where the lift is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary lift”), the requirements... 
- Lift-U® LU12 Step/Platform Onboard Lift
- 
    
  
  For EV with the charging port at rear of the vehicle, can EV be assumed to be able to back in the parking space for easy access to the charger at the head location?
  RESPONSE: This practice is not regulated by the CBC Chapter 11B accessibility provisions. DSA is not aware of any restrictions on this practice. 
- 
    
  
  If the lift manufacturer specifies that wheelchairs must face away from the vehicle when using the lift, are transportation operators required to permit passengers to board facing the vehicle?
  If the lift manufacturer specifies that wheelchairs must face away from the vehicle when using the lift, are transportation operators required to permit passengers to board facing the vehicle... 
- 
    
  
  § 38.25(c) Door height
  For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift platform, or highest point of a ramp, shall be a minimum of 68... 
- Figure 502.2 Vehicle Parking Spaces – Drawing from the U.S. Access Board
- 
    
  
  Position: ADA Standard Section 305.5
  Section 305.5 covers the current ADA Standards for the positioning of clear floor and ground space. 
- 
    
  
  11B-404.2.7 Door and gate hardware
  Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with Section 11B-309.4.... 
- Lift-U® Fold-Out Rising Floor Ramp
- 
    
  
  Elements Within Camping Units With Mobility Features [F244.2.3]
  At least one of each type of element provided within camping units with mobility features, including outdoor constructed features, parking spaces for RVs, parking spaces for vehicles other... 
- 
    
  
  Door Swing: ADA Standard Section 603.2.3
  Section 603.2.3 covers the current ADA Standards for door swings at clear floor space and clearances at fixtures in toilet and bathing rooms. 
- 
    
  
  § 38.23(a) General
  All vehicles covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances... 
- 
    
  
  Door and Gate Hardware: ADA Standard Section 404.2.7
  Section 404.2.7 covers the current ADA Standards for door and gate hardware. 
- 
    
  
  11B-203.4 Limited access spaces
  Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible... 
- 
    
  
  Balco FMS-A Roll-Up Floor Mat with Aluminum Frame Section
  Requires the Premium User plan or above. (Login or upgrade your account!)
- 
    
  
  Dome Spacing: ADA Standard Section 705.1.2
  Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch... 
- 
    
  
  11B-811.2 Clear floor or ground space
  A clear floor or ground space complying with Section 11B-305 shall be provided.... 
