See Figure 11B-604.8.1.1.2....
Search Results "Figures"
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
-
302.3 Openings
Figure 302.3 Elongated Openings in Floor or Ground Surfaces ...
-
604.5.1 Side Wall
Figure 604.5.1 Side Wall Grab Bar at Water Closets...
-
609.2.2 Non-Circular Cross Section
Figure 609.2.2 Grab Bar Non-Circular Cross Section...
-
904.3.2 Counter
Figure 904.3.2 Check-Out Aisle Counters...
-
605.2 Height and Depth
Figure 605.2 Height and Depth of Urinals...
-
505.7.2 Non-Circular Cross Sections
Figure 505.7.2 Handrail Non-Circular Cross Section...
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
This clearance location is around the cross section of the gripping surface (see Figure 5.4.7). NPRM Proposed Provision: Gripping surface clearance not addressed....
-
5.4.2 Transfer Support Length for M301 and M302
This is a linear measurement (see Figure 5.4.1). NPRM Proposed Provision: Length not addressed....
-
3.3.10 90-Degree Turn
The width required for all participants to complete a 90-degree turn in our sample was much smaller than the UDI findings (Figure 3‒10), due to differences in the abilities of people or/...
-
Station 4-Acceleration
The acceleration data were collected using time-stamped video to determine the elapsed time for the participants accelerating along a 61-m (200-ft) section of the course (figure 34)....
-
11B-705.1.1.2 Dome spacing
ETA Editor's Note This Figure has not been updated to reflect the text at 11B-705.1.1.1 regarding dome height. DSA-AC's Advisory Manual still has this same Figure....
-
11B-802.1.3 Depth
Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
11B-802.1.3 Depth
Figure 11B-802.1.3 (b) depicts a single wheelchair space with side entry....
-
Clear space
Clear space: A grid 72 inches long by 90 inches wide was used to facilitate the recording of space requirements for each WMD user (Figure 1)....
-
2.3.2. Device Acquisition
The device acquisition calculation is diagrammed in Figure 2-3....
-
2.2. Total Costs
The methodology for combining the components of the total costs is presented in Figure 2-1 below. ...
-
4.4 Knee and Toe Clearances
Figures 20-21 and Tables 5-6 show the standards from the four countries related to knee and toe clearances from a wheeled mobility device....
-
11B-610.3.1 Rectangular seats
FIGURE 11B-610.3.1 RECTANGULAR SHOWER SEAT...
-
11B-802.2.1.2 Lines of sight between heads
FIGURE 11B-802.2.1.2 LINES OF SIGHT BETWEEN THE HEADS OF SEATED SPECTATORS...
-
608.3.3 Alternate Roll-In Type Shower Compartments
Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers...
-
11B-307.3.1 Edges and corners
FIGURE 11B-307.3 POST-MOUNTED PROTRUDING OBJECTS...
-
610.3.1 Rectangular Seats
Figure 610.3.1 Rectangular Shower Seat...