Resting intervals shall comply with 1017.8.
Search Results "FTDS: Federal Trail Data Standards"
-
1017.8 Resting Intervals
-
1017.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
1017.8 Resting Intervals
Resting intervals shall comply with 1017.8.
-
1017.8.1 Length
This section requires resting intervals to be 60 inches long minimum.
-
1017.8.1 Length
The resting interval length shall be 60 inches (1525 mm) long minimum.
-
Statutory Background
Those standards must be consistent with the Board's guidelines. The ABA requires access to facilities designed, built, altered, or leased with Federal funds....
-
Department of Transportation, Federal Transit Administration
Department of Transportation, Federal Transit Administration offers information on the public transit provisions of the ADA....
-
Nate’s 1st Training Run
Nate Johnson trains for the trails in a GRIT Freedom Chair!...
-
§27.5 Head of Operating Administration
Coast Guard, Federal Highway Administration, Federal Aviation Administration, Federal Railroad Administration, National Highway Traffic Safety Administration, Federal Transit Administration...
-
The Roles of the Access Board and the Department of Justice
The Board consists of thirteen public members appointed by the President, of whom the majority must be individuals with disabilities, and the heads of twelve federal departments and agencies...
-
4.6 Health and Safety Requirements of Other Federal or State Laws
4.6 Health and Safety Requirements of Other Federal or State Laws The ADA recognizes employers' obligations to comply with requirements of other laws that establish health and safety...
-
Constructed Features
Constructed Features are commonly found along trails or as part of trails....
-
Wetland Trail Design and Construction
Most experienced trail crews try to avoid wetlands because of the construction and maintenance problems they pose....
-
Applicable standards
Applicable standards....
-
Architectural Barriers Act
significant obstacle to employment for people with disabilities—the physical design of the buildings and facilities—by requiring that all buildings designed, constructed, altered or leased with federal...
-
Introduction
Federal agencies or by non-federal entities on Federal land on behalf of a Federal agency pursuant to a concession contract, partnership agreement, or similar arrangement....
-
Compliance requirements in proposed standards
The proposed standards contain technical criteria for accessible medical diagnostic equipment....
-
Residential Dwelling Units for Sale: ADA Standard Section 233.3.2
Section 233.3.2 covers scoping requirements in the current ADA Standards for residential dwelling units for sale.
-
1017.2 Surface
This section requires the surface of trails, passing spaces, and resting intervals to be firm and stable. A firm trail surface resists deformation by indentations....
-
ADA Standards for Accessible Design
ADA Standards for Accessible Design ________________________________________________________________ 9/15/2010 The U.S....
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations....
-
1017.7.1 Maximum Running Slope and Segment Length
Not more than 30 percent of the total length of a trail shall have a running slope steeper than 1:12 (8.33%)....
-
1017.7.1 Maximum Running Slope and Segment Length
Not more than 30 percent of the total length of a trail shall have a running slope steeper than 1:12 (8.33%)....
-
F233.4.2 Residential Dwelling Units for Sale
Residential dwelling units offered for sale shall provide accessible features to the extent required by regulations issued by Federal agencies under Section 504 of the Rehabilitation Act...
