Where resting intervals are provided adjacent to the trail tread, a turning space complying with ABAAS section 304.3.2 shall be provided. ...
Search Results "FTDS: Federal Trail Data Standards"
Filters
Commonly Searched Documents
-
7.4.4.4 Turning Space
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Beneficial Designs
Our staff develops assistive and adaptive technology, performs rehabilitation research, contract design, legal consultation, standards development, and serves as a rehabilitation information...
-
1017.4 Passing Spaces
Entities should consider providing either 60 inches minimum clear tread width on trails or passing spaces at shorter intervals where the trail is heavily used or where the trail is a boardwalk...
-
C.2. - If EIT is acquired through another agency’s contract, which agency is responsible for Section 508 compliance?
agency is acquiring EIT under a multi-agency contract pursuant to the Economy Act procedures under FAR Subpart 17.5, a government-wide acquisition contract (a so-called "GWAC"), or GSA’s Federal...
-
§100.5 Scope.
[See subsections ...]
-
2013 Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG)
Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG) 2013 All Facilities and Features Addressed in the FSORAG that are Constructed or Altered Within the...
-
Selection of Variables
Sitting height is also important for drawing up standards listed in the ADAAG, as are some dozen other assorted variables such as grip strength and foot length....
-
B. TTYs & Telephone Relay Services
Communication between two persons using standard TTYs can only occur in one direction at a time....
-
F247.4.4 Routes
Routes that connect trails complying with 1017 to camping facilities, picnic facilities, viewing areas, pit toilets, and accessible elements provided within the facilities shall comply with...
-
FAA:
The Federal administration that oversees the safety of our Nation’s civil aviation system....
-
Floating Trail Bridges and Docks
The Missoula Technology and Development Center (MTDC) was asked to evaluate the use of floating bridges for trail crossings in very wet areas....
-
§ 36.103(c) Other laws.
This part does not invalidate or limit the remedies, rights, and procedures of any other Federal laws, or State or local laws (including State common law) that provide greater or equal protection...
-
Sec.36.103(c) Other laws
This part does not invalidate or limit the remedies, rights, and procedures of any other Federal laws, or State or local laws (including State common law) that provide greater or equal protection...
-
Web Sites for Gate Designs and Suppliers in the United Kingdom
Scottish Natural Heritage http://www.snh.org.uk/publications/on-line/accessguide/gates.asp BTCV (British Trust for Conservation Volunteers)...
-
7.4.4.3 Slope
The slope of a resting interval shall not exceed 1:20 (5 percent) in any direction. Where the surface is paved or is elevated above the natural ground, the slope shall not be steeper...
-
Chapter 7: Referenced Standards
[See subsections ...]
-
7.4.6 Tread Obstacles
Tread obstacles on trails shall not exceed 2 inches (50 mm) in height measured vertically to the highest point. ...
-
How to: inflate the tires on the GRIT Freedom Chair
You can inflate the tires using a standard bike pump. In this tutorial we explain how the valves work....
-
1017.9 Protruding Objects
Constructed elements on trails, passing spaces, and resting intervals shall comply with 307. Advisory 1017.9 Protruding Objects....
-
If a more recent edition of ANSI/BHMA Standards for automated doors is issued should that be followed instead of those referenced?
The specific editions of the ANSI/BHMA Standards referenced by the Standards are to be followed (although the Access Board intends to update references to keep them current)....
-
C101.1 Purpose
These Revised 255 Guidelines are to be applied to the extent required by regulations issued by the Federal Communications Commission under Section 255 of the Communications Act of 1934,...
-
C101.1 Purpose
These 255 Guidelines are to be applied to the extent required by regulations issued by the Federal Communications Commission under Section 255 of the Communications Act of 1934, as amended...
