Operable parts shall be located so that they are reachable by passengers using wheelchair when parked in a clear space 30 inches (760 mm) wide minimum and 48 inches (1220 mm) long minimum...
Search Results "Leased Space"
-
T505.3 Location of Operable Parts
-
Rebuilding Together Saratoga County - Wilton, NY
Nonprofit Facility/Community Beautification provides safe and welcoming spaces for communities to gather through renovation and beautification work for community centers, supportive housing...
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
and toe space. 4. ...
-
Common Requirements (R304.5) (Section-by-Section Analysis)
Grade breaks are not permitted on the surface of ramp runs and turning spaces. Surface slopes that meet at grade breaks must be flush....
-
§ 36.406(f)(3)
(3) Facilities that have more than 5,000 seats shall provide at least five wheelchair spaces and at least three companion seats for each wheelchair space; and...
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
and have the space feel comfortable....
-
1003.2.13 Accessible means of egress
Accessible spaces shall be provided with not less than one accessible means of egress....
-
Employee Work Areas [§203.9]
. (§206.2.8) Other requirements, including those for turning space, do not apply to areas used only by employees for work....
-
202.3 Alterations
Where existing elements, spaces, or common use areas are altered, each altered element, space, or common use area shall comply with the applicable requirements of Chapter 2....
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
§ 38.23(d)(2) Location and size
Such space shall adjoin, and may overlap, an access path....
-
11B-904.4.2 Forward approach
Knee and toe space complying with Section 11B-306 shall be provided under the counter....
-
1010.1.8 Door arrangement
Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
-
R405 Knee and Toe Clearance (Section-by-Section Analysis)
R405 Knee and Toe Clearance (Section-by-Section Analysis) The technical requirements for knee and toe clearance apply where space beneath an element is included as part of the clear space...
-
2. Protruding Objects
Accessible element or space ANSI A117.1 section APPLICATION 2....
-
12. Seating, tables, or work surfaces
Accessible element or space ANSI A117.1 section APPLICATION 12....
-
5.1.9 Doors
The door shall not swing into or otherwise obstruct the clear floor or ground space or the turning space required by 5.1.4....
-
1124B
SECTION 1118B - SPACE ALLOWANCE AND REACH RANGES 1118B.4 Clear floor or ground space for wheelchairs. 1. Size and approach. ...
-
Scoping Requirements [F244.5, F245.4, F246.4, and F247.3.2]
Within camping and picnic facilities, ORARs must connect accessible elements, spaces, and facilities provided within camping and picnic units with mobility features....
-
Utilities at Recreation Sites
size, or location), the clear floor or ground space only has to comply with requirements to the extent practicable....
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
Access Board “shelf space” shall be calculated by linear feet and drawers shall be considered shelving for purposes of determining compliance with TAS 804.5....
-
4.6.5* Vertical Clearance
At parking spaces complying with 4.1.2(5)(b), provide minimum vertical clearance of 98 in (2490 mm) at the parking space and along at least one vehicle access route to such spaces from site...
-
406.4.1 Clear height
While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular...
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
