Signs for means of egress shall comply with F216.4....
Search Results "Floor-Level Exit Sign"
Filters
Commonly Searched Documents
-
F216.4 Means of Egress
-
216.4 Means of Egress
Signs for means of egress shall comply with 216.4....
-
Transfer Protocols
Protocol A Level Transfer: All 72 study participants completed the level transfer in this protocol....
-
11B-1008.2.5.3 Handrails
Exceptions: Handrails shall not be required on ramps located within ground level use zones. Handrail extensions shall not be required....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
Buttons: ADA Standard Section 407.4.6.2
Section 407.4.6.2 covers the current ADA Standards for the elevator car control buttons.
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground....
-
Visibility: ADA Standard Section 707.7.1
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
Tray Slides: ADA Standard Section 904.5.2
The tops of tray slides shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
-
11B-904.5.2 Tray slides
The tops of tray slides shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground....
-
412.2.6 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
A. Accessible Voting Program
those features of facilities and equipment (including, but not limited to, permanent equipment such as lifts and elevators, and temporary equipment such as portable ramps, traffic cones, signs...
-
ACO Linear QuARTz Drain Design Features and Installation Video
This video from the manufacturer discusses design tips for using their products, including the QuARTz linear shower drains, which focus on eliminating barriers for level threshold designs...
-
Mounting Height
Mounting Height ADAAG specifies a signal height 80 inches above the highest floor level within the space or 6 inches below the ceiling, whichever is lower....
-
T702.1 General
Signs on non-rail vehicles shall comply with T702....
-
FAQ: Why is some of Corada’s content gray and not clickable?
This means that content is not available at your current subscription level. Please review the subscription levels and their benefits on the Access Levels page....
-
11B-206.2.3.1 Stairs and escalators in existing buildings
an escalator or stair is provided where none existed previously and major structural modifications are necessary for the installation, an accessible route shall be provided between the levels...
-
Practical Suggestions for Communicating Effectively
When communicating by writing notes, keep in mind that some individuals who use sign language may lack good English reading and writing skills....
-
Height: ADA Standard Section 903.5
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
Maximum Depth: ADA Standard Section 306.3.2
Section 306.3.2 covers the current ADA Standards for the maximum depth for knee clearance.
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-306.3.2 Maximum depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (229 mm) above the finish floor or ground....
