A parking space identification sign shall be visible from each parking space....
Search Results "Floor-Level Exit Sign"
-
11B-502.6.3 Location
-
11B-203.9 Employee workstations
employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with disabilities can approach, enter, and exit...
-
11B-203.9 Employee workstations
employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with disabilities can approach, enter, and exit...
-
11B-206.2.3 Multi-story buildings and facilities
Spaces and elements located on a level not required to be served by an accessible route must fully comply with this document....
-
11B-206.2.3 Multi-story buildings and facilities
Spaces and elements located on a level not required to be served by an accessible route must fully comply with this document....
-
11B-206.2.3 Multi-story buildings and facilities
Spaces and elements located on a level not required to be served by an accessible route must fully comply with this chapter....
-
Assistive Listening System Signage
Signs are required to indicate the availability of assistive listening systems, which are required in certain assembly areas (216.10)....
-
11B-216.5 Parking
Signs identifying parking spaces and signs within parking facilities shall comply with Section 11B-216.5....
-
11B-216.5 Parking
Signs identifying parking spaces and signs within parking facilities shall comply with Section 11B-216.5. ...
-
11B-216.5 Parking
Signs identifying parking spaces and signs within parking facilities shall comply with Section 11B-216.5....
-
General: ADA Standard Section 306.2.1
Section 306.2.1 of the ADA Standards covers information in the current ADA Standards for toe clearance.
-
Halsey Taylor Cane Touch Apron for HAC ADA Series
Cane Touch Apron model 42522 for HAC ADA Series GENERAL: The cane touch apron is an optional accessory designed to satisfy customer preference for symmetry on HAC bi-level units as the...
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
Alterations [4.1.6(1)(f) & (k)]
In alterations, ADAAG does not require a level of access greater than that required in new construction....
-
Why is a top landing required at curb ramps if side flares are provided?
A landing at least 36” long at the top of curb ramps provides room to approach or exit ramps and turn without encountering compound slopes of flared sides....
-
ACCESSIBLE MEANS OF EGRESS
A continuous and unobstructed way of egress travel from any point in a building or facility that provides an accessible route to an area of refuge, a horizontal exit, or a public way....
-
11B-411.4.5 Illumination
The level of illumination at the car controls shall comply with Section 11B-407.4.5....
-
11B-411.4.5 Illumination
The level of illumination at the car controls shall comply with Section 11B-407.4.5....
-
11B-228.3.2 Minimum number
EVCS complying with Section 11B-812 shall be provided in accordance with Section 11B-228.3.2 for each combination of charging level and EV connector type integral to the EV charger....
-
Re: 11B-216.6 Entrances
Directional signs complying with Section 11B-703.5 that indicate the location of the nearest entrance complying with Section 11B-404 shall be provided at entrances that do not comply with...
-
Ascension Virtuoso 5460F Vertical Permanently-Installed Wheelchair Lift
The Ascension Virtuoso 5460F also does not have an access ramp at the lower landing, so patrons can enter the lift directly at floor level....
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
