It is not required by this code to provide an accessible route when the terrain of the site is such that both of the following apply: 1....
Search Results "9-1-1 Service"
-
11B-233.3.1.2.6.2 Test number one, individual building test
-
11B-233.3.1.2.6.2 Test number one, individual building test
It is not required by this code to provide an accessible route when the terrain of the site is such that both of the following apply: 1....
-
Willoughby Industries HS-1013-46-HC 18" wide Lavatory
Standard lavatory shall include: oval-shaped bowl, 13" x 9 1/2" x 6" deep, stainless steel penal filler/bubbler, fast drain....
-
DEFINITIONS
The term “auxiliary aids and services” includes qualified interpreters on-site or through video remote interpreting (VRI) services; notetakers; real-time computer-aided transcription services...
-
Sears Brands, LLC Craftsman 10 in. Digital LaserTrac® Level
Digital LaserTrac Level uses digital technology to clearly read the angle of the tool to the 1/10 of a degree. Reads right side up or down....
-
11B-227.2 Check-out aisles
NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION MINIMUM NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION REQUIRED TO COMPLY WITH 11B-904.3 1...
-
11B-227.2 Check-out aisles
NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION MINIMUM NUMBER OF CHECK-OUT AISLES OF EACH FUNCTION REQUIRED TO COMPLY WITH 11B-904.3 1...
-
Areas of Refuge: ADA Standard Section 216.4.2
Section 216.4.2 covers scoping requirements in the current ADA Standards for signs at areas of refuge.
-
Handrails: ADA Standard Section 403.6
Section 403.5.4 covers the current ADA Standards for handrails that are provided along walking surfaces of accessible routes.
-
Handrails: ADA Standard Section 1008.2.5.3
EXCEPTIONS: 1. Handrails shall not be required on ramps located within ground level use zones. 2. Handrail extensions shall not be required....
-
Seat Location: ADA Standard Section 1009.2.2
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
1607A.9.2 Grab bars, shower seats and accessible benches
[DSA-AC & HCD 1-AC] See Chapter 11A, Section 1127A.4, and Chapter 11B, Sections 11B-609.8, 11B-610.4 and 11B-903.6, for grab bars, shower seats and dressing room bench seats, as applicable...
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
1607.9.2 Grab bars, shower seats and accessible benches
[DSA-AC & HCD 1-AC] See Chapter 11A, Section 1127A.4, and Chapter 11B, Sections 11B-609.8, 11B-610.4 and 11B-903.6, for grab bars, shower seats and dressing room bench seats, as applicable...
-
Additional Clearance: ADA Standard Section 306.2.4
Section 306.2.4 covers the current ADA Standards for additional clearances for toe space.
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.1 General
Space under an element between the finish floor or ground and 9 inches (229 mm) above the finish floor or ground shall be considered toe clearance and shall comply with Section 11B-306.2...
-
§ 38.83(c)(3) Ramp threshold
The transition from roadway or station platform and the transition from vehicle floor to the ramp or bridge plate may be vertical without edge treatment up to 1/4 inch....
-
§ 38.159(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches (75 mm), and the transition from roadway...
-
Calibrating the level used for measuring accessible routes for ADAAG Compliance by ACT Services Consulting
Requires the Premium User plan or above. (Login or upgrade your account!)
