Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
Search Results "Seat Height"
Commonly Searched Documents
-
11B-607.4 Grab bars
-
Size and Spacing of Grab Bars and Handrails [4.26.2]
A minimum 18 inch vertical clearance (specified for recessed handrails) may place elements above maximum reach heights....
-
Elevated Dune Crossings
Locate handrails continuously along both sides of the dune crossing at a height of 34 inches (865 millimeters) to 38 inches (965 millimeters) above the walking surface....
-
iii. Radiological Diagnostic equipment
Positron Emission Tomography (PET), and X-rays, including Computerized Axial Tomography (CAT) scans and mammography, are difficult to access for individuals with disabilities because of the height...
-
211 Drinking Fountains
(This can be accommodated by the use of a "hi-lo" fountain; by providing one fountain accessible to those who use wheelchairs and one fountain at a standard height convenient for those who...
-
Location
Van-accessible parking spaces located in parking garages may be clustered on one floor (to accommodate the 98-inch minimum vertical height requirement)....
-
III-2.1000 General
Likewise, being only five feet in height may prove to be an insurmountable barrier to an individual whose ambition is to play professional basketball....
-
Destination-Oriented Elevators
Visual display of each floor a car has been programmed to stop at and automatic verbal announcement of each car stop are required Visual indicators: ½” min. character height...
-
Location
Van-accessible parking spaces located in parking garages may be clustered on one floor (to accommodate the 98-inch minimum vertical height requirement)....
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
11B-705.1.1.2 Dome spacing
ETA Editor's Note This Figure has not been updated to reflect the text at 11B-705.1.1.1 regarding dome height. DSA-AC's Advisory Manual still has this same Figure....
-
11B-809.10.5.2 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. b....
- Belson Outdoors Recycled Plastic Universal Access Picnic Table
- Kompan, Inc. M175 - Water Lilies Spring Rider
-
I. Background
The subject of this Agreement is the XL Center, a stadium located in Hartford, Connecticut, with a seating capacity of approximately 16,000....
-
Re: American Specialties 9014 Surface Mounted Horizontal Baby Changing Station
If seated in a wheelchair, the angle to graps the handl hold would not be possible. The strap was left dangling to use as an opener....
-
4.3.3 Clear Floor Area
for the minimum required size of spaces used by wheeled mobility users (e.g. platform/wheelchair lifts) and for spaces/locations that are designated for wheeled mobility users such as in seating...
- HEWI Mirror 950.01.300
- Inpro Corporation Endurant® Stainless Steel Straight Grab Bar
- Kompan, Inc. Spinner Plate NRO110
- ViewPlus Technologies VP Cub Braille Printer
-
Grab Bar and Backrest Evaluation
The analysis also revealed that the presence of grab bars helped participants to transfer higher and lower than their mobility device seats....
-
Equivalent Facilitation [§103]
For example, transfer shower stalls are required to be 36 inches by 36 inches absolute so that grab bars remain within reach from the seat....
-
382.13 Do carriers have to modify policies, practices, and facilities to ensure nondiscrimination?
One difference is that the new rule specifies that carriers may require preboarding as a condition of receiving certain seating or in-cabin stowage accommodations....