access by persons using mobility aids and shall have an unobstructed passageway at least 32 inches wide leading to an accessible sleeping compartment complying with §38.127 of this part or seating...
Search Results "Seat Height"
-
§ 38.113(b) Passageway
-
Adjustable gap protocol
One was a 41 year old men that had a traumatic brain injury and double lower knee amputation, weighted 192 lbs, did not report his height, and had been using a manual wheelchair for twenty...
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
1010.2.12.1 Delayed egress locking system
Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm). 6.4....
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
1010.2.13.1 Delayed egress locking system
Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm). 6.4....
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
5. Compare Surface Options
Results of ASTM F1292-99/04, with written confirmation of the critical fall height for the surface material....
- Landscape Forms Inc. Towne Square Bench Collection
- HEWI System 800 Adjustable Mirror
- Autoadapt Turny Evo
-
382.67 What is the requirement for priority space in the cabin to store a passenger’s wheelchair?
This requirement applies to aircraft with 100 or more passenger seats....
-
b. Transfer Surface Location
and transfer sides of the transfer surface for diagnostic equipment used by patients in the supine, prone, or side-lying position (M301) and diagnostic equipment used by patients in the seated...
-
G) Parks and Recreation Programs
However, when only some of the ball fields are accessible, the scheduling policies for their use will need to accommodate requests for accessible fields, player areas, or spectator seating...
- Landscape Forms Inc. Petoskey Bench Collection
-
3.6 Youngstown Tinseltown 7, 7401 Market Street, Boardman, Ohio
- In Auditoria 1 and 7, one fixed companion seat shall be provided next to each wheelchair space....
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. [2010 ADAS] Advisory 704.2.1 Clear Floor or Ground Space. ...
-
§382.133(b)
within the United States, an electronic assistive device specified in paragraph (d) of this section on all aircraft originally designed to have a maximum passenger capacity of more than 19 seats...
-
Carrier Programs
Carriers operating aircraft with more than 19 passenger seats must establish and implement a written program for carrying out the requirements of the law....