exception into three exceptions covering operable parts intended only for use by service or maintenance personnel, electrical or communication receptacles serving a dedicated use, and floor...
Search Results "Input Floor"
Commonly Searched Documents
-
205 and 309 Operable Parts
-
1133B.2.5.2
Hardware shall be centered between 30 inches (762 mm) and 44 inches (1118 mm) above the floor....
-
1115B.4.4.8, Item 1
A folding seat mounted 18 inches (457 mm) above the floor, and with a minimum space of 1 inch (25 mm) and maximum space of 1 1/2 inches (38 mm) allowed between the edge of the seat and any...
-
4.4.3 Implications of Mammography Equipment Components
This base support must be low enough so that the woman’s wheelchair footrests can ride over it; furthermore, it must allow enough unobstructed floor space to ensure that her wheelchair’s...
-
PHYSICAL PROVISIONS
The product should comply with the following provisions ADAAG section 4.2 Space Allowance and Reach Ranges ADAAG section 4.3 Accessible Route ADAAG section 4.5 Ground and Floor...
-
106.5.41 Path of Travel
An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other...
-
Section 36.406(g) Medical Care Facilities (Section-by-Section Analysis)
feasible to distribute these rooms among each of the specialty areas, would it be appropriate that required accessible rooms be dispersed so that there are accessible patient rooms on each floor...
-
What is an Accessible Seat and Who Can Use One?
Accessible seats are spaces specifically designed for wheelchairs and include features such as an accessible approach, location at grade, clear floor space, and larger dimensions....
-
Alterations
restriping a parking lot, moving walls, moving a fixed ATM to another location, installing a new service counter or display shelves, changing a doorway entrance, or replacing fixtures, flooring...
-
Wheelchair Turning Space [4.2.3]
Generally, the depth of usable floor space below fixed elements with knee and toe clearance is limited to 19 inches....
-
End of Document
Attorney Southern District of Florida /s/ Veronica Harrell-James VERONICA HARRELL-JAMES Assistant United States Attorney UNITED STATES ATTORNEY’S OFFICE 99 N.E. 4th Street, 3rd Floor...
-
2. b. ii. Accessible Door Hardware
Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor. xv Figure 14 and 15 (top and bottom left) Non-accessible door...
-
4.3 Locker Room Barriers and Solutions
High cost Not enough space in front of the lockers Ask staff to permanently assign you a locker in an accessible location, such as at the end of a row where there is extra floor...
-
4.3.5 Turning clearance
T shaped space is not included here because it can be derived from the 90-degree turn to establish the width of the arms of the T and the clear floor space to determine the length of each...
-
4.16.6 Dispensers
As a result, the dispenser was located 24" above the floor, 5" higher than the minimum height in ADAAG, and 42" from the rear wall (Figure 13), which would have been too high and too far...
-
11B-220.2 Point-of-sale devices
point-of-sale devices are provided at check stands and sales and service counters required to comply with Sections 11B-227.2 and 11B-227.3, they shall comply with Sections 11B-707.2 _|Clear Floor...
-
3. Costs—Summary of Likely Economic Impact
However, there are some input variables that carry uncertainty. No substantive comments with data on these inputs were received in the public comments on the 2014 NPRM....
-
11B-604.5.2 Rear wall
There are wall-mounted bedpan washing devices that could be used instead, taking care not to obstruct either the side or the rear grab bars, or the required clear floor space....
-
11B-203.9 Employee workstations
work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish floor...
-
11B-250.1 General
At each electric vehicle charging station complying with Section 11B-812 where the charger and its controls are oriented toward the vehicle space it serves and the charger’s clear floor...
- Inpro Corporation ENDURANT® Ceiling Hung Partitions
- Interface Whole Earth Collection WE151 Carpet Tiles
- Neo-Metro Ebb Concept - Wall Mounted Cast Resin Deck Featuring Ebb Basin