Controls and operating mechanisms shall comply with the operable parts requirements in sections 308 and 309.4 of the ABAAS. Exception 1....
Search Results "Shall"
Filters
Commonly Searched Documents
-
4.7.2 Controls and Operating Mechanisms
-
4.34.6.5(1)
(1) The sink and surrounding counter shall be mounted at a maximum height of 34 in (865 mm) above the floor, measured from the floor to the top of the counter surface, or shall be adjustable...
-
M301.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
§ 37.137(b)(2) Consultation with individuals with disabilities
Each entity shall contact individuals with disabilities and groups representing them in the community....
-
11B-242.4 Spas
At least one accessible means of entry shall be provided for spas....
-
11B-812.1 General
Electric vehicle charging stations (EVCS) shall comply with Section 11B-812 as required by Section 11B-228.3....
-
11B-403.7 Continuous gradient
All walks with continuous gradients shall have resting areas, 60 inches (1524 mm) in length, at intervals of 400 feet (121,920 mm) maximum....
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 _|Finish and Contrast|_ through 11B-703.5.4 _|Character Proportions|_, and Sections 11B-703.5.7 _|Stroke Thickness|_...
-
§ 38.113(b) Passageway
Doorways required to be accessible by paragraph (a) of this section shall permit access by persons using mobility aids and shall have an unobstructed passageway at least 32 inches wide leading...
-
11B-306.2.3 Minimum required depth
Where toe clearance is required at an element as part of a clear floor space, the toe clearance shall extend 17 inches (432 mm) minimum under the element....
-
11B-242.4 Spas
At least one accessible means of entry shall be provided for spas....
-
11B-217.5 Shelves for portable TTYs
Where a bank of telephones in the interior of a building consists of three or more public pay telephones, at least one public pay telephone at the bank shall be provided with a shelf and...
-
11B-805.1 General
Medical care facilities and long-term care facilities shall comply with Section 11B-805....
-
11B-703.5 Visual characters
Visual characters shall comply with Section 11B-703.5....
-
11B-812.1 General
Electric vehicle charging stations (EVCS) shall comply with Section 11B-812 as required by Section 11B-228.3....
-
11B-403.7 Continuous gradient
All walks with continuous gradients shall have resting areas, 60 inches (1524 mm) in length, at intervals of 400 feet (121,920 mm) maximum....
-
11B-304.3.1 Circular space
The turning space shall be a space of 60 inches (1524 mm) diameter minimum. The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
238.2.3 Weather Shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with 1006.4....
-
11B-411.1.2 Car designations
Elevator cars shall be designated with a single alphabetic character....
-
703.5 Visual Characters
Visual characters shall comply with 703.5....
-
11B-804.6.3 Dishwasher
Clear floor or ground space shall be positioned adjacent to the dishwasher door....
-
804.6.3 Dishwasher
Clear floor or ground space shall be positioned adjacent to the dishwasher door....
-
1134A.8, Item 2
A clear maneuvering space at least 30 inches by 48 inches (762 mm by 1219 mm) shall be provided at lavatories and shall be centered on the lavatory....