A public accommodation may investigate the potential misuse of accessible seating where there is good cause to believe that such seating has been purchased fraudulently....
Search Results "Designated Aisle Seat (Assembly)"
Filters
Commonly Searched Documents
-
§ 36.302(f)(8)(ii)
-
A7. Curb Ramps
If there is a curb between the access aisle and the accessible route to the building, is there a curb ramp that meets the following requirements: [ADA Stds 4.7] a....
-
III-7.8200 Restaurants and cafeterias
ADAAG contains requirements for counters and bars, access aisles, food service lines, tableware and condiment areas, raised speaker's platforms, and vending machine areas (but not controls...
-
Bus Loading Zones: ADA Standard Section 209.2.2
Section 209.2.2 covers scoping requirements in the current ADA Standards for bus loading zones.
-
§ 35.138(d)(3) Sales limited to less than four tickets
If a public entity limits sales of tickets to fewer than four seats per patron, then the public entity is only obligated to offer as many seats to patrons with disabilities, including the...
-
1115B.4.4.8, Item 1
A folding seat mounted 18 inches (457 mm) above the floor, and with a minimum space of 1 inch (25 mm) and maximum space of 1 1/2 inches (38 mm) allowed between the edge of the seat and any...
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-704.2.1 Clear floor or ground space
The clear floor or ground space shall not be obstructed by bases, enclosures, or seats. Advisory 11B-704.2.1 Clear floor or ground space....
-
Teeing Grounds: ADA Standard Section 238.2.1
Section 238.2.1 covers scoping requirements in the current ADA Standards for teeing grounds.
-
11B-209.2.2 Bus loading zones
In bus loading zones restricted to use by designated or specified public transportation vehicles, each bus bay, bus stop, or other area designated for lift or ramp deployment shall comply...
-
11B-238.2.1 Teeing grounds
Where one teeing ground is provided for a hole, the teeing ground shall be designed and constructed so that a golf car can enter and exit the teeing ground....
-
Chapter 8: Special Rooms, Spaces, and Elements
Chapter 8 covers various types of elements, rooms and spaces, including assembly areas (802), dressing, fitting, and locker rooms (803), kitchens and kitchenettes (804), medical care and...
-
WHO IS IMPACTED BY THE NEW REGULATIONS?
museums, concert halls, arts and performing arts centers, stadiums, private colleges and universities, lecture halls, galleries, parks, zoos, other places of exhibition or entertainment, and assembly...
-
4.3.11.1(6)
Doors in the smoke barrier shall be tight-fitting smoke- and draft-control assemblies having a fire-protection rating of not less than 20 minutes and shall be self-closing or automatic closing...
-
Types of Systems
For example, an FM system may be better than an infrared system in some open-air assemblies since infrared signals can be overpowered by the sun; on the other hand an infrared system is...
-
K) Temporary Events
appropriate locations, provide an accessible route throughout the site, and provide other accessible features for food service, toilet facilities (including accessible portable toilets), assembly...
-
Overview
power-driven mobility devices; For example, a sports arena, on or after March 15, 2011, must tell an individual with a disability and his or her companions about the features of accessible seating...
-
Background
staff report that a large number of calls to their technical assistance hotline from architects, contractors, and others are seeking clarification of tolerances for specific materials or assemblies...
-
6. Grab Bars
Is there a horizontal grab bar at the head of the tub that is at least 12" long for stabilization and aid in transfer from a wheelchair to the fixed tub seat - see Figure 34 on page 25?...
-
Pilot Rock End Accessible Multi-Pedestal Table APT Series 3"x4" Recycled Plastic
These picnic tables have 8 ft. tops which extend 1 foot beyond each end of the 6 ft. seats, 30" table height and 18" seat height (nominal dimensions). ...
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
The unique frame design of the 103 creates a smooth transition over joint for wheeled equipment....
-
Covered Entities
Covered Entities Manufacturers of telecommunications equipment and customer premises equipment are required by §255 of the Telecommunications Act of 1966 to "ensure that the equipment is designed...
-
Lifeguard Above-Ground Spa Lift LSL #100275
Our spa lifts are designed to provide access to most spas at an affordable price. The benefits of warm water therapy are supported by the Arthritis Foundation....
-
Other Road and Shared Use Path Users
They are so small or are used at such slow speeds that their operational characteristics are less important because roads, shared use paths, and other public ways will necessarily be designed...
