Such wheelchair spaces shall not reduce the required means of egress width....
Search Results "Clear Width at Turn"
-
1007.6.1 Size
-
Revolving Doors or Turnstiles
automated revolving doors, if large enough, may be usable by people with disabilities, certain questions remain about the appropriate maximum speed, minimum diameter, compartment size, width...
-
Ambulatory Accessible Compartment
The width of ambulatory compartments is specified to ensure that the grab bars required on both sides are simultaneously within reach....
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
Ramp
The ramp had a constant width of 30 inches and was 1 inch thick. The minimum length was 8 inches and the maximum length was 11 inches....
-
11B-405.7.5 Doorways
Doors, when fully open, shall not reduce the required ramp landing width by more than 3 inches (76 mm)....
-
Platform Edges
Where this breakaway material is installed at a platform edge, the width of the detectable warning surface can begin at the edge of the breakaway material rather than at the edge of the...
-
36 Inch Wide Stalls
A 36-inch width (absolute) allows the parallel grab bars to be used simultaneously when changing from a standing position to a seated position and vice versa....
-
Trailhead Signs
designed for use by hikers or pedestrians, the final rule requires the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width...
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
-
11B-405.7.5 Doorways
Doors, when fully open, shall not reduce the required ramp landing width by more than 3 inches (76 mm)....
-
§ 38.23(d)(4) Orientation
wheelchair or mobility aid facing forward, or rearward with a padded barrier, extending from a height of 38 inches from the vehicle floor to a height of 56 inches from the vehicle floor with a width...
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
47121702 Shipping Weight: 3.28 lbs Technical Specs Item Sanitary Napkin Receptacle Container Mounting Style Wall or Free-Standing Height 11" Container Depth 4-1/4" Width...
-
Sesame Retractable Stairs with Lift
When the lift is not in use, the full width of the staircase is available for pedestrian passage....
-
Sargent AD8600 & NB-AD8600 Concealed Vertical Rod Exit Device for Aluminum Doors
The AD8600 & NB-AD8600 is designed for standard width single or double aluminum doors. The AD Series 8600 Concealed Rod Exit Device meets ANSI/BHMA Grade 1 standards....
-
Sargent 8300 Mortise Lock Exit Device
Features Designed for standard width stiles with a narrow design look Through-bolted trim for quiet operation and security Single door applications Double...
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
accommodates many floor finishes including concrete, terrazzo, tile, VCT and carpet Key Specifications: Floor/Floor, Floor/Wall Conditions Movement: +/- 50% Joint width...
-
§382.9(d)
provision of this part, and that the carrier has provided an effective alternative means of achieving the objective of the provisions of this part subject to the waiver or have demonstrated by clear...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Exception: Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with Section 11B-902.4 where a clear floor or ground...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
Define "task." (Section-by-Section Analysis)
The Department feels that the common definition of task is sufficiently clear and that it is not necessary to add to the definitions section. ...
-
4.2.6* Side Reach
If the clear floor space allows parallel approach by a person in a wheelchair, the maximum high side reach allowed shall be 54 in (1370 mm) and the low side reach shall be no less than 9...
