At least one percent of all seats (but no fewer than two) are required to provide 24 inches clear leg room from the front edge of the seat to the nearest obstruction or to the back of the...
Search Results "Meeting Room"
Filters
Commonly Searched Documents
-
11B-221.1 General
-
Section 1630.1(c) Construction
were denied, or qualification standards were unlawfully discriminatory.”); 2008 House Judiciary Committee Report at 6 (“An individual who does not qualify as disabled * * * does not meet...
-
NOTES
Some tables may require installation of a modified top to meet the 19” standard but would not require changing out the installed base. 21....
-
1. New Curb Ramp Construction and Alterations
In particular, new curb ramp standards were developed in order to address conflicting federal and state requirements regarding use of a half-inch curb lip at the point where the ramp meets...
-
6. May an employer ask an individual for documentation when the individual requests reasonable accommodation?
He attends numerous meetings to plan marketing strategies....
-
I. Introduction to the Study
The purpose of this longitudinal study was to evaluate a variety of playground surfaces, their costs, and their ability to meet accessibility requirements while documenting deficiencies...
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
-
3.3.1 Research Data
Steinfeld presented their findings at the Committee’s second meeting, and he made himself available to answer Committee and Subcommittee (Examination Tables and Chairs) questions over subsequent...
-
Operable Parts
proposed to require that the operable parts on new automated airport kiosks be tactilely discernible by users to avoid unintentional activation and requested comment regarding the cost of meeting...
-
ADA Facilities Compliance Strategies for Private Hospitals
REVIEW - Study all construction and remodeling projects in progress to minimize future problems with “readily achievable” barrier removal and/or failure to meet the “readily accessible”...
-
ADA Facilities Compliance Strategies for Private Entities
REVIEW - Study all construction and remodeling projects in progress to minimize future problems with “readily achievable” barrier removal and/or failure to meet the “readily accessible”...
-
Providing Appropriate Information About Accessibility
Forest Service policy is to provide nonjudgmental information about programs and facilities so that visitors may choose the areas, activities, and facilities that best meet their interests...
-
Gates and Barriers
The travel surface must meet the same requirements as the adjacent outdoor recreation access route, beach access route, or trail. ...
-
EXHIBIT A: EDX WEBSITE ACCESSIBILITY POLICY
To meet this goal, edX is implementing several initiatives, including: Conforming www.edx.org, our mobile applications, and our software platform with the Web Content Accessibility...
-
Knee and Toe Clearance (M303.2.4)
requiring in the final standards: a) What would be the incremental costs for the design or redesign and manufacture of the equipment to include toe clearance and knee clearance that meets...
-
Medical Device Manufacturers
The incremental costs for manufacturers to conform these products to the standards are expected to be small because the features may already meet or closely meet the standards....
-
Section 37.137 Paratransit Plan Development
The purpose of the survey is to determine what is being provided already, so that a transit provider can accurately assess what additional service is needed to meet the service criteria...
-
Flush Controls On Toilets
As we all know the requirements for the accessible toilet flush control is on the wide, open side of the toilet room and/or compartment. ...
-
1.5 Technical Assistance.
The office with primary responsibility for assisting airports in meeting accessibility requirements is ACR....
-
Proposed Section 36.309 Purchase of Furniture and Equipment (Preamble, Section-by-Section Analysis)
Some types of equipment will be required to meet the accessibility requirements of subpart D....
-
11B-221.2.1.3 Other boxes
Additionally, because the wheelchair spaces must also meet the dispersion requirements of 221.2.3, the boxes containing these wheelchair spaces cannot all be located in one area unless an...
-
Accessible Fishing Piers and Platforms
Structures that were not built specifically for fishing do not need to meet these requirements, even if people use them for fishing (for example, a bridge, flood control dam or breakwater...
-
8. Additional and Unaddressed Issues
Additional and Unaddressed Issues Throughout the MDE Advisory Committee’s meetings, members raised issues that went beyond the scope of the Committee’s statutory authority but were nonetheless...
-
404.2.10 Door and Gate Surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...