EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches (64 mm)....
Search Results "Grade 2 Braille"
-
M303.3.3.1 Running Slope
-
810.10 Track Crossings
EXCEPTION: Openings for wheel flanges shall be permitted to be 2½ inches (64 mm) maximum. Figure 810.10 (Exception) Track Crossings...
-
303.1 General
Animal containment areas shall not be required to comply with 303. 2. Areas of sport activity shall not be required to comply with 303....
-
303.1 General
Animal containment areas shall not be required to comply with 303. 2. Areas of sport activity shall not be required to comply with 303....
-
§27.11(c)(3)
(3) A recipient shall, for at least three years following completion of the evaluation required under paragraph (c)(2) of this section, maintain on file, make available for public inspection...
-
T603.4 Movement
Wheelchair securement systems shall limit the movement of an occupied wheelchair to 2 inches (51 mm) maximum in any direction when secured in accordance with the manufacturer’s instructions...
-
E1-a
Is there an accessible route, at least 36 inches wide, that connects the accessible entrance to all shelter areas (it may narrow to 32 inches wide for up to 2 feet in length)?...
-
§ 37.42(e)(1)
(1) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet...
-
1.9.1.1.4
For detailed requirements on existing buildings, see Chapter 11B, Division 2, Section 11B-202....
-
Recreation Site Development Scale
Recreation Site Development Scale—An area that is improved, developed, or otherwise identified for recreation and that has a development scale of 0, 1, 2, 3, 4, or 5....
-
4.8.7 Edge Protection
Curbs shall be a minimum of 2 in (50 mm) high (see Fig. 17)....
-
4.8.7 EDGE PROTECTION
Curbs shall be a minimum of 2 in (50 mm) high (see Fig. 17)....
-
FAQ: How do I access My Bookmarks?
Login to Corada. 2. Go to My Account. 3. Click on "My Bookmarks."...
-
Accessible Hotel Rooms (Section-By-Section Analysis and Response to Comments)
- Rather than requiring 5% of new hotel rooms to be accessible to people with mobility impairments, between 2 and 4% accessibility (depending on total number of rooms) is required....
-
1.9.1.1.4
For detailed requirements on existing buildings, see Chapter 11B, Division 2, Section 11B-202....
-
§ 37.42(e)(1)
(1) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet...
-
§ 38.81(b)
(b) Other stepwells, and doorways with lifts, ramps or bridge plates, shall have, at all times, at least 2 foot-candles of illumination measured on the step tread or lift or ramp, when deployed...
-
The Family Cafe
Informed individuals and their families make better choices. 2. ...
-
Electronic Code of Federal Regulations - Title 34, Subtitle B, Chapter III, PART 303—EARLY INTERVENTION PROGRAM FOR INFANTS AND TODDLERS WITH DISABILITIES
(Authority: 20 U.S.C. 1400(d)(2), 1431(a)(5), 1431(b))...
-
Danielle's Foundation
Our grant period runs every quarter (90 days) and the 2 page application is very simple to fill out. ...
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches...
-
233.3.1.2 Residential Dwelling Units with Communication Features
In facilities with residential dwelling units, at least 2 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide communication features complying...
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...
-
T303.3.3 Handrail and Stanchion Non-Circular Cross Section
Handrails and stanchions with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6¼ inches (160 mm) maximum, and a cross section dimension of 2¼...
