(Approved by the Office of Management and Budget under control number 2529-0034) [53 FR 20233, June 2, 1988; 53 FR 28115, July 26, 1988, as amended at 54 FR 37645, Sept. 12, 1989]...
Search Results "Grade 2 Braille"
-
§8.24 Existing housing programs.
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to...
-
§ 36.302(c)(3)
If a public accommodation properly excludes a service animal under §36.302(c)(2), it shall give the individual with a disability the opportunity to obtain goods, services, and accommodations...
-
Accessible Ramp Features
At least 36 inches between handrails 2. Top landing part of walk 3. Bottom landing part of walk 4. Handrail height 34 to 38 inches 5. Edge protection...
-
7.4.4.3 Slope
Where the surface is paved or is elevated above the natural ground, the slope shall not be steeper than 1:48 (2 percent) in any direction. ...
-
4.21.7 CURBS
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
3.1.3.1 Slope of Vehicle Parking Areas
The slope of vehicle parking areas shall not exceed 1:48 (2 percent) in any direction. Exception....
-
2.8 Openings
Openings in the surface of ORARs shall be small enough to prevent passage of a 1/2 inch (13 mm) diameter sphere....
-
609.2.2 Non-Circular Cross Section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm)...
-
6.7.2 Cross Slope
Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
-
2.5.4 Slope
Where the surface is paved or is elevated above the natural ground, the slope shall not be steeper than 1:48 (2 percent) in any direction. ...
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
Stop Signs and More Disabled Passenger Loading Zone Only Sign
LOADING ZONE SIGN - 12X18 - REFLECTIVE RUST-FREE HEAVY GAUGE ALUMINUM ADA GUIDE SIGNS AND PARKING SIGNS Constructed of rust-free, heavy gauge, durable aluminum 3M Engineer Grade...
-
Sargent 8200 Mortise Lock with BHW Trim
Features: Available in 37 functions ANSI/BHMA Grade 1 Uses standard mortise prep Easy installation Tapered surfaces on all components Available with Microshield, an antimicrobial...
-
Compliance Signs Parking Sign PKE-20710
• Reflective sign or label with [ Accessible symbol ] ACCESSIBLE PARKING message is directly printed in color on engineer-grade 3M reflective vinyl sheeting....
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
in gap for easy installation Primer-less silicone sealant available in 28.7oz [849 ml] cartridges or 2.63 US gallon [108 L] pails - Self leveling (horizontal applications) - Gun grade...
-
Salsbury Industries Custom Designer Lockers 30000C
Constructed of industrial grade particleboard and covered with durable high pressure laminate, Salsbury 30000C series custom designer lockers are ideal for settings where a professional...
-
Section 35.151(b)(3) Alterations to historic facilities
Section 35.151(b)(3) Alterations to historic facilities The final rule renumbers the requirements for alterations to historic facilities enumerated in current Sec. 35.151(d)(1) and (2)...
-
11B-705.1.2.2 Curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
d. i.
Provide doors that require no more than 5 lbf to push or pull open at the following locations: (1) Spy City Café men's and women's toilet rooms; (2) Main Lobby restrooms vestibule;...
-
T702.4 Character Height
Sign location Minimum character height Exterior route or destination signs on boarding side of non-rail vehicle 2...
-
11B-411.2.2.1 Visible identification
The character on the fixture shall be upper case with a height of 2 1/2 inches (64 mm) minimum complying with Sections 11B-703.5.1, 11B-703.5.3, 11B-703.5.4, 11B-703.5.7 and 11B-703.5.8...
-
Section 35.151(b)(3) Alterations to historic facilities (Section-by-Section Analysis)
Alterations to historic facilities (Section-by-Section Analysis) The final rule renumbers the requirements for alterations to historic facilities enumerated in current § 35.151(d)(1) and (2)...
