The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
Search Results "9-1-1 Service"
-
11B-406.5.7 Cross slope
-
11B-406.4.1 Slope
Blended transitions shall have a running slope not steeper than 1:20....
-
11B-406.2.2 Sides of curb ramps
Where provided, curb ramp flares shall not be steeper than 1:10....
-
11B-411.2.1.2.4.2 Size
Elevator assignment characters shall be 1 inch high (25 mm) minimum....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12....
-
12113(d)(2) Applications
individual has an infectious or communicable disease that is transmitted to others through the handling of food, that is included on the list developed by the Secretaryof Health and Human Services...
-
‘‘Public entity.’’
The term ‘‘public entity’’ is defined in accordance with section 201(1) of the ADA as any State or local government; any department, agency, special purpose district, or other instrumentality...
-
Public entity (Section-by-Section Analysis)
The term "public entity" is defined in accordance with section 201(1) of the ADA as any State or local government; any department, agency, special purpose district, or other instrumentality...
-
12113(e)(2) Applications
individual has an infectious or communicable disease that is transmitted to others through the handling of food, that is included on the list developed by the Secretary of Health and Human Services...
-
General: ADA Standard Section 207.1
Section 207.1 of the ADA Standards covers information on scoping requirements for accessible means of egress in the most current ADA Standards.
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-406.5.8 Counter slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to and within 24 inches (610 mm) of the curb ramp shall not be steeper than 1:20....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
H.8. - Do private sector web sites that provide a subscription service to Federal agencies need to conform to 508 provisions?
(See section C.3 above) However, a vendor must design and manufacture products or services that meet the applicable Access Board's technical provisions if it wishes to sell those products...
-
C. Collaboration with Other Entities
services....
-
Hafele America Co. Wall Mounted Comfort Folding Shower Seat
Hygienic opening and water run off Load bearing capacity (330 lbs) 150 kg Adjustment Height adjustable to 4 levels between 420 - 510 mm (16 9/16 - 20 1/16") in increments of 30...
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
H. Employment at State Operated Vocational Education Centers Through State Civil-Service Authorities
Where recruitment and hiring of staff for State operated vocational education centers is conducted by a State civil service employment authority, the State education agency operating the...
-
Depth: ADA Standard Section 703.2.1
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background....
