modifications in policies, practices, or procedures when the modifications are necessary to avoid discrimination on the basis of disability or to provide program accessibility to their services...
Search Results "9-1-1 Service"
-
§ 37.5(i)(3) Public entity-public transport
-
3.1 Comparison of Our Sample to U.S. Population of WhMD Users
Table 3‒1....
-
You must not discriminate against qualified individuals with a disability
[Sec. 382.7(a)(1)] You must not require a passenger with a disability to accept special services (including, but not limited to, pre-boarding) not requested by the passenger....
-
Platform to Hoistway Clearance: ADA Standard Section 409.4.3
Section 409.4.2 covers the ADA Standards for the required clearance between the car platform and the hoistway landing in private residence elevators.
-
Platform to Runway Clearance: ADA Standard Section 410.4
Section 410.4 covers the current ADA Standards for the required clearance between the platform and any runway landing.
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-505.6 Gripping surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface....
-
11B-505.6 Gripping surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface....
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
Stainless Steel Sanitary Napkin Receptacle, 11" Height, 1 EA Item# 1ECK9 Mfr....
-
Willoughby Industries HS-1014-96-HC-FA 18" wide Lavatory
Standard lavatory shall include: rectangular-shaped bowl, 14 1/2" x 9 1/2" x 5 1/2" deep, fast drain with air vent, 1 1/2" slip joint, cast brass union 'p' trap, removable bottom panel attached...
-
Inpro Corporation Endurant® Stainless Steel Folding Grab Bar
Folding Grab bar comes with a satin finish Easily folds out either way ADA compliant and tested to withstand 220 lbs Key Specifications 31 7/32" x 31 1/...
-
Floor or Ground Surfaces: ADA Standard Section 502.4
Section 502.4 covers the current ADA Standards for the floor or ground surfaces of accessible parking spaces.
-
Slope: ADA Standard Section 405.7.1
Section 405.7.1 covers the current ADA Standards for the slope in ramp landings.
-
Platform to Hoistway Clearance: ADA Standard Section 407.4.3
Section 407.4.3 covers the current ADA Standards for the required clearance between the elevator car platform and the hoistway landing.
-
Ground Level: ADA Standard Section 1008.2.5.1
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-1008.2.5.1 Ground level
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
-
11B-1008.2.5.1 Ground level
Ramp runs connecting ground level play components shall have a running slope not steeper than 1:16....
