Nevertheless, owners and franchisors of new lodging facilities should put all parties that participate in the design and construction process, including architects, interior designers, building...
Search Results "Floor Designation"
-
STEP 2: TELL YOUR ARCHITECT AND BUILDING CONTRACTOR THAT YOU EXPECT YOUR NEW FACILITY TO COMPLY WITH THE ADA.
- Willoughby Industries ADA Cabinet Shower US-FA-HC
-
1002 Amusement Rides
Provisions for amusement rides require either a wheelchair space on the ride, a ride seat designed for transfer, or a device designed for transfer to the ride....
-
I. BACKGROUND
The project design phase for the Middletown Road Station renovations was completed by an NYCTA design team in 2007. Pls.’ Responses ¶ 29....
- BEA Inc. LZR Microscan Installation Video
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
§ 38.95(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier down (if applicable) or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
§ 38.125(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
11B-407.4.8.2.1 Signal type
The signal shall be an automatic verbal annunciator which announces the floor at which the car is about to stop....
-
Waviness Index
Waviness Index The Waviness Index, ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria, was developed in response to the...
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
§35.173(a)
(a) When the designated agency issues a noncompliance Letter of Findings, the designated agency shall--...
-
§ 35.173(a)
(a) When the designated agency issues a noncompliance Letter of Findings, the designated agency shall—...
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
The bottom of the skirting or detectable object must be no higher than 27 inches above the floor....
-
4.1.3(17)(a)
are provided, then they shall comply with 4.31.2 through 4.31.8 to the extent required by the following table: Number of each type of telephone provided on each floor...
-
5.8.2.7 Base Support Allowance Recommendation
of 4 inches above the floor at a depth of 28 inches from the front edge of the breast platform....
-
Other Related Projects
Beneficial Designs, Inc., is working on a project called Designing an Accessible Vehicle Barrier for Trails....
- Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device
-
Appendix Three: Bibliography
Space Requirements for Wheeled Mobility Devices in Public Transportation: Analysis of Clear Floor Space Requirements....
-
General: ADA Standard Section 224.1
Section 224.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for transient lodging guest rooms.
- Wikk Industries Ingress'r Automatic Door Control
