The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not displaying...
Search Results "Floor Designation"
Filters
Commonly Searched Documents
-
11B-502.8.2 Lettering
-
11B-233.3.2.1 Buyer identified residential dwelling units for sale
The requirements of Section 11B-233.3.2 also apply to housing programs that are operated by public entities where design and construction of particular residential dwelling units take place...
-
Nora Systems, Inc. Norament 920 Stairtreads
Floor covering that meets special fire requirements. Rubber stairtread for your fire safe exit....
-
Transfer Surface Height (M301.2.1 and M302.2.1)
M301.2.1 and M302.2.1 would require the height of the transfer surface during patient transfer to be 17 inches minimum and 19 inches maximum measured from the floor to the top of the transfer...
-
1.14 Riser
1.14 "Riser" shall mean and refer to an elevated tier (usually six to eighteen inches) in an auditorium on which seats are affixed to the auditorium floor....
-
4. Toilet seat height
Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs....
-
Question 20
Is the required floor and wall space inside public restrooms and fitting rooms blocked by obstacles such as trash cans, chairs, or shelving?...
-
J3
Is the top of the spout no higher than 36 inches above the floor and at the front of the fountain or water cooler? [ADA Standards § 4.15.2] Yes No...
-
I. Toilet Seat
Is the toilet seat at each accessible toilet between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: ___________________________________________...
-
e-vii
Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No...
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
5.1.4 Turning Space
Where the camp shelter floor is not elevated above the trail or ORAR, as applicable, a turning space complying with ABAAS section 304.3 shall be provided....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum....
-
Sec. 469.102(a)
(a) The architect, interior designer, landscape architect, or engineer who has overall responsibility for the design of a constructed or reconstructed building or facility shall submit the...
-
Aqua Creek Scout Pool and Spa Lift Informational Video
The Scout pool and spa lift is an ADA Compliant pool lift designed for in-ground anchoring. This lift is designed to be able to fit into many existing anchor systems. ...
-
2.4.3 Impetus for Manufacturers to Improve MDE Accessibility
from patients during the design phase (e.g., by asking persons with disabilities to test different design options)....
-
1002.6 Transfer Devices for Use with Amusement Rides
Operators and designers have flexibility in developing designs that will facilitate individuals to transfer onto amusement rides....
-
11B-1002.6 Transfer devices for use with amusement rides
Operators and designers have flexibility in developing designs that will facilitate individuals to transfer onto amusement rides....
-
1002.6 Transfer Devices for Use with Amusement Rides
Operators and designers have flexibility in developing designs that will facilitate individuals to transfer onto amusement rides....
-
Wheelchair Accessible Gates
They have a series of drawings for gate designs that meet accessibility requirements in the UK....
-
1002.6 Transfer Devices for Use with Amusement Rides
Operators and designers have flexibility in developing designs that will facilitate individuals to transfer onto amusement rides....
-
Is a compliant passenger loading zone required where valet parking is provided?
Also, an accessible passenger loading zone is required where passenger loading zones are provided and specifically designed or designated, such as many hotel entrances, whether or not valet...
-
11B-1002.6 Transfer devices for use with amusement rides
Operators and designers have flexibility in developing designs that will facilitate individuals to transfer onto amusement rides....
