Profiles: Specially designed profiles are used in this system to provide maximum durability while providing a subtle visual divide....
Search Results "Floor Designation"
- Panda S.85 All Aluminum Slim Profile Lift and Slide System
-
F2
If there is a built-in reception or other type of counter, does it have a section that is at least three feet long that is no higher than 36 inches above the floor or is there a nearby surface...
-
4.19.2 HEIGHT AND CLEARANCES
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finished floor....
-
4.1.2(9)
(9) If drinking fountains or water coolers are provided, approximately 50 percent of those provided on each floor shall comply with 4.15 and shall be on an accessible route....
-
2010 ADA Standards
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
104.1.1 Construction and Manufacturing Tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
- Neo-Metro Urban Stainless Steel Toilet 8950-3-ADA-PFS
-
Clearance in Base (M301.4.1 and M302.4.1)
Clearance in the base of the equipment allows the legs of a portable floor lift to fit under the base of the equipment....
- BEA Inc. LZR-Microscan Swinging Door Sensor
-
Section 36.406(d) Social Service Center Establishments
UFAS is currently the design standard for new construction and alterations for entities subject to section 504....
-
Section 36.406(d) Social Service Center Establishments (Section-by-Section Analysis)
UFAS is currently the design standard for new construction and alterations for entities subject to section 504....
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...
-
11B-809.9.2 Clear width
U-shaped kitchens, designed with parallel approach at a sink, range, cooktop or other fixtures and appliances located at the base of the U without knee and toe clearance, shall provide a...
-
11B-308.1 General
The following table provides guidance on reach ranges for children according to age where building elements such as coat hooks, lockers, or operable parts are designed for use primarily...
-
General: ADA Standard Section 308.1
Section 308.1: of the ADA Standards covers information in the current ADA Standards for reach ranges.
-
11B-308.1 General
The following table provides guidance on reach ranges for children according to age where building elements such as coat hooks, lockers, or operable parts are designed for use primarily...
-
12. Reach Range
Are there towel racks or bars placed within 54" of the floor for side approach or 48" of the floor for forward approach so persons who use wheelchairs can approach and use the towel racks...
-
4.19.2 Height and Clearances
Lavatories shall be mounted with the rim or counter surface no higher than 34 in (865 mm) above the finish floor....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
- DORMA BTS80 EMB Series Door Closer
- Magnuson Group WH Hanger Style Wall Rack
- Cavity Sliders USA Inc. CL100 ADA Privacy Lever Lock for Pocket Doors
-
Executive Summary
Workgroup participant remarks combined with the ideas of Access Board members and University of Pittsburgh researchers were used to design a new transfer data collection tool....